BLVDS04/NOPB National Semiconductor, BLVDS04/NOPB Datasheet - Page 5

• Manufacturer Part Number: BLVDS04/NOPB
• Description: BOARD EVAL DS92LV1023/1224
• Manufacturer: National Semiconductor

Specifications of BLVDS04/NOPB

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *BLVDS04; *BLVDS04/NOPB; BLVDS04

2. On the DUT card, side A, solder a jumper from the R17 pad to the inside pad of C32.
3. On the DUT card, side A, cut the traces from J11 and J12 to the Bus1B connectors.
4. On the DUT card, side B, cut the trace between R18 and the inside pad of C5.
5. On the DUT card, side B, cut the trace between R20 and the inside pad of C10.
6. On the DUT card, side B, solder jumpers from J11 and J12 (DUT card side A) to the DUT card Side B.
To configure a DUT card for BUS1 side B –
B1
1. On the DUT card, side A, solder a jumper from the R16 pad to the inside pad of C30.
2. On the DUT card, side A, solder a jumper from the R17 pad to the inside pad of C32.
3. On the DUT card, side B, cut the trace between R18 and the inside pad of C5.
4. On the DUT card, side B, cut the trace between R20 and the inside pad of C10.
A DUT card should never be configured to connect to more than 1 bus at a time unless the busses have
been specially configured to ‘daisy chain’ the BLVDS signals.
The Adapter Cards
Four adapter cards are supplied with the BLVDS Demo Kit. These cards allow the dip header connections
on the DUT cards to be adapted for use with SMB or SMA type connectors. The adapter cards are shipped
without the SMB connectors to control the cost of the kit.