HS3048BTCI01H Renesas Electronics America, HS3048BTCI01H Datasheet - Page 43

• Manufacturer Part Number: HS3048BTCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS3048BTCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Select [E10T PC Card Driver 2] when using the PCMCIA card emulator, and [E10T PCI Card
Driver 2] when using the PCI card emulator.
7. The HDI window is displayed, and the dialog box is displayed as shown in figure 2.8.
8. Supply power to the user system.
2.5.1 H8/xxxx E10T Emulator Mode
This mode is used when debugging is performed by the emulator. The following procedures
apply when [H8/xxxx E10T Emulator] has been selected from the three activation modes listed in
the [Select Session] dialog box.
Note: Only download the user program to the flash memory area. If a program taking up
1. After the [System Clock] window appears, input the system clock frequency. This frequency
The subsequent procedures depend on the activation mode that was selected in step 5.
value is used when erasing flash memory in the emulator.
memory that includes RAM is downloaded, a [COMMUNICATION TIMEOUT ERROR]
will occur.
Figure 2.8 Dialog Box of the Power-on Request Message
Figure 2.9 [System Clock] Dialog Box
17