HS7615KCM01H Renesas Electronics America, HS7615KCM01H Datasheet - Page 225

• Manufacturer Part Number: HS7615KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7615KCM01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

27. Note on Using Old Version of Windows
28. Support of Double Float Format
29. Note on Continuous Step Execution
30. Note on Using the [Run program] Dialog Box
31. Memory Test Function
32. Count Specification for the Break Condition Function
33. If illegal instructions are executed by STEP commands, the emulator cannot go to the next
In using the old released version of Windows
selected from the [Setup] menu, an application error occurs and the HDI abnormally exits.
This is due to the old version of COMCTL32.DLL in the System directory of the Windows
directory. Download the update program of COMCTL32.DLL from the Microsoft
homepage for installation, or update the version of Windows
In the following memory operations, the double float format is not supported:
When the step is continuously executed by selecting [Step...] from the [Run] menu, do not use
the BREAKPOINT because this will cause the HDI to abnormally operate.
When [Run...] is selected from the [Run] menu to specify the stop address, there is the
following note:
This product does not support the memory test function, which is used by selecting [test] from
the [memory] menu.
When the count specification is 1 or more and the following operations are performed on the
set address, note that the count specification that has been set previously becomes 1.
program counter.
[Fill Memory] dialog box
[Search Memory] dialog box
MEMORY_FILL command
The [Format] specification in the [Copy Memory] dialog box is ignored. Memory is
copied in a byte unit.
When the breakpoint that has been set as Disable is specified as the stop address, note that
the breakpoint becomes Enable when the user program stops.
Sets the address as the stop position of the [Go to cursor] function.
Sets the address as the stop address in the [Run...] dialog box.
95
95 (such as 4.00.950a), if [Options...] is
95.
201