PCWHD IDE COMPILER Custom Computer Services Inc (CCS), PCWHD IDE COMPILER Datasheet - Page 213

• Manufacturer Part Number: PCWHD IDE COMPILER
• Description: PCWHD PIC10,16,18,24, DSPIC
• Manufacturer: Custom Computer Services Inc (CCS)
• Type: Compilerr

Specifications of PCWHD IDE COMPILER

• For Use With/related Products: Microchip PIC10, PIC12, PIC16, PIC18, PIC24, dsPIC MCUs
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 429-1009

i2c_speed( )
Syntax:
Parameters:
Returns:
Function:
Availability:
Requires:
Examples:
Example Files:
Also See:
input( )
Syntax:
Parameters:
Returns:
Function:
value = input (pin)
Pin to read. Pins are defined in the devices .h file. The actual value is a bit
address. For example, port a (byte 0x2C2 ) bit 3 would have a value of 0x2C2*8+3
or 5651 . This is defined as follows: #define PIN_A3 5651 .
The PIN could also be a variable. The variable must have a value equal to one of
the constants (like PIN_A1) to work properly. The tristate register is updated
unless the FAST_I0 mode is set on port A. note that doing I/0 with a variable
instead of a constant will take much longer time.
0 (or FALSE) if the pin is low,
1 (or TRUE) if the pin is high
This function returns the state of the indicated pin. The method of I/O is dependent
on the last USE *_IO directive. By default with standard I/O before the input is
done the data direction is set to input.
i
i
baud is the number of bits per second.
stream - specify the stream defined in #USE I
Nothing.
This function changes the I2c bit rate at run time. This only works if the hardware
I2C module is being used.
All devices.
#USE I2C
I2C_Speed (400000);
none
i2c_poll, i2c_start, i2c_stop, i2c_slaveaddr, i2c_isr_state,
#USE
2
2
c_speed (baud)
c_speed (stream, baud)
I2C,
I2C Overview
2
C
i
2
c_write,
i
2
c_read,
199