QW1 TechTools, QW1 Datasheet - Page 29

• Manufacturer Part Number: QW1
• Description: PROGRAMMER PIC MCU QUICKWRITER
• Manufacturer: TechTools
• Series: QuickWriter™r
• Type: QuickWriterr

Specifications of QW1

• Contents: MCU Programmer with In-Circuit Serial Programming Cable and Optional GANG Adapters
• For Use With/related Products: PIC Micro® MCU
• For Use With: CBL-ICSP - CABLE PROG QUICKWRITER SERIALQW-4SSOP18 - ADAPTER QUICKWRITER 4GANG 18SSOPQW-4SSOP28 - ADAPTER QUICKWRITER 4GANG 28SSOPQW-4SO8/14W - ADAPT QUICKWRTR 4GANG 8/14SOIC WQW-4SO8/14N - ADAPT QUICKWRTR 4GANG 8/14SOIC NQW-4SOIC18 - ADAPTER QUICKWRITER 4GANG 18SOICQW-4ZIF18 - ADAPTER QUICKWRITER 4-GANG 18ZIFQW-4SOIC28 - ADAPTER QUICKWRITER 4GANG 28SOICQW-4PLCC44 - ADAPTER QUICKWRITER 4GANG 44PLCCQW-4ZIF40/28 - ADAPT QUICKWRITER 4GANG 40/28ZIFMP-ZIF14 - ADAPTER QUICKWRITER 14-PIN ZIFMP-SOIC8/14 - ADAPTER QUICKWRITER 8/14-SOICMP-SSOP18 - ADAPTER QUICKWRITER 18-SSOPMP-SSOP28 - ADAPTER QUICKWRITER 28-SSOPMP-14000 - ADAPTR QUICKWRTR PIC14000 28-PINMP-SOIC18 - ADAPTER QUICKWRITER 18-SOICMP-SOIC28 - ADAPTER QUICKWRITER 28-SOICMP-PLCC44 - ADAPTER QUICKWRITER 44-PIN PLCCMP-ZIF18/28 - ADAPTER QUICKWRITER 18/28PIN ZIFMP-ZIF40 - ADAPTER QUICKWRITER 40-PIN ZIF

©2006 TechTools
5.6
Legend - Programming Tasks
Parent Node
Child Nodes
High byte of error codes
Select a parent node to perform the tasks listed beneath it. Some parent tasks will also perform a
related sub task from another parent node (i.e. Program will also perform a Program/Verify of the
Fuses node).
A Child node can be selected to perform a single task.
EF_VDDHV
EF_VDDTIME
EF_VPPLV
EF_VPPHV
EF_VPPTIME
EF_VDD5
EF_VPPNZ
EF_timeout
EF_RX
EF_failed
EF_badfw
EF_HIGHBAUD
EF_abort
EF_unknown
EF_VDDLV
EF_port
- Child nodes are collapsed.
- Child nodes are expanded. .
- This node has been disabled in Option Settings and will be skipped.
- This node is not available for the selected MCU and will be skipped.
- Normal, available child task.
- This task has been disabled in Option Settings and will be skipped.
- This task is not available for the selected MCU and will be skipped.
- An error has occurred in at least one child task.
- Node is selected and preparing to perform its task or the task was canceled.
- An error occurred for at least one socket while performing this task.
- This task was completed successfully.
= $200;
= $400;
= $800;
= $1000; { 'MCLR Voltage TOO HIGH'
= $2000; { 'MCLR not rising'
= $4000; { 'Voltage detected on VDD'
= $8000; { 'Can not pull MCLR low'
= $2;
= $4;
= $8;
= $10;
= $20;
= $40;
= $80;
= $100;
= $1;
{ 'Communication Timeout, Hardware not responding'
{ 'Communication Error Detected, BAD data received' }
{ 'Current Programming Task Failed'
{ 'Firmware update Required'
{ 'Higher Transfer Speed Failed'
{ 'User Aborted Task in progress.'
{ 'Unknown Error has Occurred.'
{ 'Error communicating with Port'
{ 'VDD Voltage TOO HIGH'
{ 'VDD not rising'
{ 'MCLR Voltage TOO LOW'
{ 'VDD Voltage TOO LOW (+5)' }
}
}
}
}
}
}
}
Advanced
27
}
}
}
}
}
}
}