FS-940 Digi International, FS-940 Datasheet - Page 20

• Manufacturer Part Number: FS-940
• Description: JTAG-BOOSTER FOR ADSP-21XXX 5V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-940

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: ADI ADSP-21xxx, 5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

JTAG-Booster for Analog Devices ADSP-21xxx
There is no Analog Devices ADSP-21xxx in the JTAG chain
No Analog Devices ADSP-21xxx was found in the JTAG chain. Check the
target power. Try with option /DRIVER=4 again.
Value of option /FILE-OFFSET out of range
The value of the option /FILE-OFFSET= points behind end of file.
wrong driver #
The value specified with the option /DRIVER= is out of range.
wrong Identifier (xxxx)
No valid identifier found. Check the specified chip select signal and the bus
width. Try with the option /DEVICE= .
Wrong length of boundary scan register. Should be 363 for a Analog
Devices ADSP-21060/21061/21062. (Should be 285 for a Analog Devices
ADSP-21065/Should be 481 for a Analog Devices ADSP-21161.)
The length of the boundary scan register of the selected part (if there are
more than one in the chain) does not fit to the Analog Devices ADSP-21xxx.
Check the target connection. Check the target CPU type. Check the settings
for /IROFFS= and /CPUPOS= , if there are several parts in the JTAG
chain.
20
JTAG_ADSP-21xxxa.doc