T92S11D12-12 Tyco Electronics, T92S11D12-12 Datasheet - Page 2

• Manufacturer Part Number: T92S11D12-12
• Description: RELAY PWR PC MNT DPDT 30A 12VDC
• Manufacturer: Tyco Electronics
• Series: T92r

Specifications of T92S11D12-12

• Relay Type: General Purpose
• Contact Form: DPDT (2 Form C)
• Contact Rating (current): 30A
• Switching Voltage: 240VAC
• Coil Type: Standard
• Coil Current: 141.67mA
• Coil Voltage: 12VDC
• Turn On Voltage (max): 9 VDC
• Turn Off Voltage (min): 1.2 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Circuit: DPDT (2 Form C)
• Contact Rating @ Voltage: 30A @ 240VAC
• Control On Voltage (max): 9 VDC
• Control Off Voltage (min): 1.2 VDC
• Coil Voltage Vdc Nom: 12V
• Contact Current Max: 30A
• Contact Voltage Ac Nom: 600V
• Contact Voltage Dc Nom: 28V
• Coil Resistance: 86ohm
• Contact Configuration: DPDT
• Contact Rating: 30 A at 12 VDC
• Contact Termination: PCB
• Mounting Style: PCB
• Power Consumption: 1.7 W
• Contact Material: Silver Cadmium Oxide
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 8-1393211-9; PB351

512
Ordering Information
NOTE: All part numbers are RoHS compliant.
Stock Items – We recommend that our authorized distributors stock the following items for immediate delivery.
Ambient Temperature vs. Coil Voltage
Assumptions:
Operate Data
Must Operate Voltage: AC Coil: 80% of nominal voltage or less.
Must Release Voltage: 10% of nominal voltage or more.
Initial Operate Time
Initial Release Time
Max Operating Frequency: 14 operations per minute.
T92P7A22-24
T92P7A22-120
Dimensions are shown for refer-
ence purposes only.
1. Basic Series:
2. Enclosure:
3. Contact Arrangement:
4. Coil Input:
5. Mounting & Termination:
6. Contact Material:
7. Coil Voltage: (See Coil Data Table)
1. Thermal resistance = 35°C per Watt (DC only.)
2. Still air.
3. Nominal coil resistance.
4. Max. mean coil temperature = 155°C (change of resistance method).
5. Coil temperature rise due to load = 6.3°C @ 30 amps.
6. Curves are based on 1.7W at 25°C (DC only.)
T92 = Printed circuit board / panel mount power relay.
P = Dust protected plastic case.
S = Wash-tight, tape sealed, plastic case (Mounting & Termination Type 1).
7 = 2 form A (DPST-NO).
A = AC voltage, 60 Hz. or 50/60 Hz. (See Coil Data Table)
1 = Printed circuit board mount; printed circuit board terminals.
2 = Panel mount via flanged cover; .250” (6.35mm) x .032” (.81mm) quick connect terminals.
3 = Panel mount via flanged cover; .187” (4.75mm) x .032” (.81mm) quick connect terminals for coil and .250” (6.35mm) for contacts.
4 = Panel mount via flanged cover, .187” (4.75mm) x .020” (.51mm) quick connect terminals for coil and .250” (6.35mm) for contacts.
5 = Panel mount via flanged cover, M4 screw terminals w/ captive pressure plates. Requires Enclosure P and Contact Arrangement 7 .
2 = Silver cadmium oxide.
(DC)
(60Hz.)
(50/60Hz.)
100
120
80
60
40
20
0
70
Top sealed, not wash-tight, not tape sealed on bottom (Mounting & Termination Types 2, 3 & 4).
75 80
T92P7A22-240
T92P7D12-12
12 = 12VDC
12 = 12VAC
110 = 100/110VAC
85
(2)
(2)
:
: 15 ms typical, (25 ms max. w/bounce).
90
Applied Coil Voltage (% of Rated Nominal)
DC Coil: 75% of nominal voltage or less.
10 ms typical, (25 ms max. w/bounce).
95 100 105 110 115 120 125 130 135 140 145 150
T92P7D12-24
T92P7D22-12
11 = 2 form C (DPDT).
4 = Silver tin indium oxide.
24 = 24VDC
24 = 24VAC
120 = 110/120VAC
Dimensions are in inches over
(millimeters) unless otherwise
specified.
T92P7D22-24
T92P11A22-24
Typical Part Number
208 = 200/208VAC
48 = 48VDC
T92P11A22-120
T92P11A22-240
Issued 3-03 (PDF Rev. 8-07)
D = DC voltage.
Catalog 1308242
B
Notes
(1) FLA, LRA ratings are compatible with 3.5 ton compressor applications.
(2) Nominal voltage, no coil suppression, excluding bounce.
Environmental Data
Temperature Range:
Vibration: 0.065” (1.65mm) double amplitude for 10-55 Hz., functional.
Shock, Operational: 10g for 11 ms, 1/2 sine wave pulse with no contact
Mechanical Data
Termination: Printed circuit terminals; .250” (6.35mm) quick connects for
Enclosure: Dust protected plastic case or wash-tight, tape sealed,
Weight: 3 oz. (86g) approximately.
Conditions
All parametric, environmental and life tests are performed according to EIA
Standard RS-407-A at standard test conditions (25°C ambient, 20-50% RH,
29.5 ± 1” Hg.) unless otherwise noted.
T92
Storage: -55°C to +155°C.
Operating: AC Coil: -40°C to +65°C.
T92P11D22-12
T92P11D22-24
Specifications and availability
subject to change.
110 = 110VDC
240 = 220/240VAC
(washable) plastic case.
S
coil and contacts; .187” (4.75mm) quick connects for coil
and .250” (6.35mm) quick connects for contacts; or M4
screws with captive pressure plates for coil and contacts.
DC Coil: Silver cadmum oxide contacts: -40°C to +85°C.
T92S7D12-12
T92S7D12-24
opening > 100µs.
11
Silver tin indium oxide contacts: -40°C to +70°C.
277 = 250/277VAC
D
T92S11D22-12
T92S11D22-24
2
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
2
-24
P&B