HC2-H-AC24V-F Panasonic Electric Works, HC2-H-AC24V-F Datasheet - Page 8

• Manufacturer Part Number: HC2-H-AC24V-F
• Description: RELAY PWR 7A DPDT 24VAC PLUG-IN
• Manufacturer: Panasonic Electric Works
• Series: HCr
• Type: General Purpose Relayr

Specifications of HC2-H-AC24V-F

• Relay Type: General Purpose
• Contact Form: DPDT (2 Form C)
• Contact Rating (current): 7A
• Switching Voltage: 250VAC
• Coil Type: Standard
• Coil Current: 50mA
• Coil Voltage: 24VAC
• Turn On Voltage (max): 19.2 VAC
• Turn Off Voltage (min): 7.2 VAC
• Mounting Type: Socket
• Termination Style: Socketable
• Circuit: DPDT (2 Form C)
• Contact Rating @ Voltage: 7A @ 250VAC
• Control On Voltage (max): 19.2 VAC
• Control Off Voltage (min): 7.2 VAC
• Relay Construction: Non-Latching
• Contact Arrangement: DPDT
• Coil Voltage Ac: 24V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 7.2VACV
• Pick-up Voltage (max): 19.2VAC
• Maximum Power Rating: 1.75KVA
• Operate Time: 20ms
• Contact Current Rating: 7A
• Contact Material: Silver Tin Oxide/Gold Flash
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 35.2mm
• Product Depth (mm): 20.8mm
• Product Length (mm): 27.2mm
• Operating Temp Range: -50C to 70C
• Pin Count: 8
• Mounting Style: Plug-In
• Package / Case: Dust Cover
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 255-2756; HC2-H-AC24V-F

HC
3. TM type
Chassis (Panel) cutout
Schematic
Same schematic as plug-in type HC relay
Be aware that there is no LED indicator with CR
circuit and built-in diode types.
For Cautions for Use, see Relay Technical Information.
2-3.6 dia.
2-.142 dia.
1.480
37.6
Tolerance: 0.1
.004
4 Form C type External dimensions
.142
3.6
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
13
1
5
9
13.35
.526
4.45
.175
20.6
.811
10
2
6
Chassis (Panel) cutout in tandem mounting
Notes: 1. In mounting, use M3 screws and M3 washers.
11
3
7
4
8
12
14
4.31
.170
.039
2.54
.100
4.06
.160
6.35
.250
6.35
.250
1
34.2
1.346
6.4
.252
2. When mounting TM types, use washers to prevent damage or distortion to the polycarbonate cover.
3. When tightening fixing screws, the optimum torque range should be 0.294 to 0.49 N·m, (3 to 5 kgf·cm).
27
1.063
Moreover, use washers to prevent loosening.
.020
0.5
37.6
1.480
1.480
37.6
General tolerance: 0.3
1.693
43
.827
.079
21
2
.906
23
.827
21
2
.079
.012
The diagrams show the external dimensions of
the 4 Form C and 4-pole bifurcated (twin) types.
For 1 Form C, 2 Form C, and 3 Form C, see
diagrams at plug-in types (only the terminals are
different).