SP2-L2-DC12V Panasonic Electric Works, SP2-L2-DC12V Datasheet - Page 3

• Manufacturer Part Number: SP2-L2-DC12V
• Description: RELAY LATCHING 15A 12VDC PLUG-IN
• Manufacturer: Panasonic Electric Works
• Series: SPr
• Type: Power Relayr

Specifications of SP2-L2-DC12V

• Relay Type: General Purpose
• Contact Form: DPDT (2 Form C)
• Contact Rating (current): 15A
• Switching Voltage: 250VAC
• Coil Type: Latching, Dual Coil
• Coil Current: 25mA
• Coil Voltage: 12VDC
• Turn On Voltage (max): 8.4 VDC
• Mounting Type: Socket
• Termination Style: Quick Connect - .187" (4.7mm)
• Circuit: DPDT (2 Form C)
• Contact Rating @ Voltage: 15A @ 250VAC
• Control On Voltage (max): 8.4 VDC
• Relay Construction: Latching Double Coil
• Contact Arrangement: DPDT
• Coil Voltage Dc: 12V
• Voltage Rating (vdc): 30V
• Voltage Rating (vac): 250V
• Coil Resistance: 480Ohm
• Pick-up Voltage (max): 8.4VDC
• Maximum Power Rating: 300W/3.75KVA
• Operate Time: 30ms
• Contact Current Rating: 10DC/15ACA
• Contact Material: AgSnO2
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 22mm
• Product Depth (mm): 25.6mm
• Product Length (mm): 51mm
• Operating Temp Range: -50C to 60C
• Pin Count: 10
• Mounting Style: Socket
• Package / Case: Dust Cover
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Control Off Voltage (min): -
• Lead Free Status / Rohs Status: Compliant
• Other names: 255-1490; SP2-L2-DC12V

SP
2. Specifications
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
REFERENCE DATA
Operate and release time (Single side stable)
SP2
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Characteristics
50
40
30
20
10
*2. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
0
actual load.
conditions in NOTES.
80
Coil applied voltage,%V
Initial contact pressure
Arrangement
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Minimum operating power
Nominal operating power
Min. switching capacity (Reference value)*
Insulation resistance (Initial)
(25 C, 50% relative humidity)
Breakdown voltage
(Initial)
Operate time [Set time] (at 20 C
Release time [Reset time] (at 20 C
Temperature rise (coil) (at 20 C
Shock resistance
Vibration resistance
Mechanical
Electrical (resistive load)
Conditions for operation, transport and storage*
Max. operating speed
Operate time
Release time
90
100
110
Between open contacts
Between contact and coil
Between contact sets
Functional
Destructive
Functional
Destructive
Max.
Min.
Max.
Min.
Item
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
68
68
68
F)
SP4
F)
F)
50
40
30
20
10
1
0
2
80
2 Form C: Approx. 0.392 N (40 g
2 Form C, 4 Form C
Max. 30 m (By voltage drop 6 V DC 1A)
Stationary contact: Au flashed AgSnO
2 Form C: 15 A 250 V AC, 4 Form C: 10 A 250 V AC
2 Form C: 3,750 VA, 300 W, 4 Form C: 2,500 VA, 300 W
2 Form C, 4 Form C: 250 V AC, 30 V DC (48V DC: Max. 2A)
2 Form C: 15 A (AC) 10 A (DC), 4 Form C: 10 A
150mW (Single side stable, 2 coil latching)
300mW (Single side stable, 2 coil latching)
100 mA 5V DC
Min. 1,000M
Measurement at same location as “Breakdown voltage” section.
1,500 Vrms for 1 min. (Detection current: 10 mA)
3,000 Vrms for 1 min. (Detection current: 10 mA)
3,000 Vrms for 1 min. (Detection current: 10 mA)
Max. 30 ms [Max. 30 ms]
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 20 ms [Max. 30 ms]
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Max. 40 C
(By resistive method, nominal voltage applied to the coil; nominal switching capacity.)
Min. 392 m/s
Min. 980 m/s
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10 s.)
10 to 55 Hz at double amplitude of 3 mm
Min. 5 10
2 Form C:
Min. 10
4 Form C:
Min. 10
Ambient temperature: –50 C to +60 C
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 times/min. (at rated load)
2 Form C: 50 g
Coil applied voltage,%V
Operate time
Release time
90
5
5
(15 A 250 V AC [at 20 times/min.]), Min. 10
(15 A 250 V AC [at 20 times/min.]), Min. 10
7
(at 180 times/min.)
2
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10 s.)
(Half-wave pulse of sine wave: 6 ms.)
(at 500V DC)
100
1.76
oz; 4 Form C: 65 g
110
Max.
Min.
Max.
Min.
1.41
2
oz), 4 Form C: Approx. 0.196 N (20 g
Specifications
–58 F to +140
type, Movable contact: AgSnO
Coil temperature rise
Tested sample: SP2-DC24V
Ambient temperature: 20 to 22 C
2.29 oz
50
40
30
20
10
0
19.2 21.6
5
5
(10 A 30 V DC [at 20 times/min.])
(10 A 30 V DC [at 20 times/min.])
F;
24.0
Coil applied voltage,%V
26.4 28.8 31.2 33.6 36.0
2
type
68 to 72 F
0.71
oz)
15 A
10 A
5 A
0 A