MY4ZN AC110/120 (S) Omron, MY4ZN AC110/120 (S) Datasheet
MY4ZN AC110/120 (S)
Specifications of MY4ZN AC110/120 (S)
MY4ZN-AC110/120S
MY4ZN-AC110/120S
MY4ZNAC110/120(S)
MY4ZNAC110120S
Z2891
Related parts for MY4ZN AC110/120 (S)
MY4ZN AC110/120 (S) Summary of contents
Page 1
... Note: 1. When ordering, add the rated coil voltage to the model number(s), followed by “(S)”. Rated coil voltages are given in the coil ratings table. Example: MY2 AC12(S) ↑ Rated coil voltage 2. Arc barrier standard on all four-pole relays. 3. Other models also available, such as, three-pole versions, flangemount, PCB, etc. Contact your Omron Representative for details. Model Plug-in socket/solder terminals Standard with LED With LED indicator and ...
Page 2
... AC coil resistance and impedance are provided as reference values (at 60 Hz). 4. Power consumption drop was measured for the above data. When driving transistors, check leakage current and connect a bleeder re- sistor if required. 5. Rated voltage denoted by “*” will be manufactured upon request. Ask your OMRON representative. ■ Contact Ratings Item ...
Page 3
... Precautions Connections Do not reverse polarity when connecting DC-operated Relays with built-in diodes or indicators or high-sensitivity DC-operated Relays. Mounting Whenever possible, mount Relays so that it is not subject to vibration or shock in the same direction as that of contact movement. 100 mΩ max max max. 1,800 operations/hr (under rated load) 1,000 MΩ ...
Page 4
Engineering Data ■ Maximum Switching Power MY2 AC resistive load AC inductive load (cosφ=0.4) DC resistive load DC inductive load (L/R=7 ms) Switching voltage (V) ■ Endurance MY2 (Resistive Loads) 10000 5000 3000 250 VAC 1000 30 VDC 500 30 ...
Page 5
MY4Z (Resistive Loads) 10000 5000 3000 1000 250 VAC 500 300 30 VDC 100 30 VDC 50 250 VAC 30 10 Switching Current (A) MY4Z (Inductive Loads) 10000 5000 3000 1000 30 VDC 500 300 30 VDC 100 250 VAC ...
Page 6
Dimensions Note: All units are in millimeters unless otherwise indicated. ■ 2-Pole Models MY2N ■ 4-Pole Models MY4N ■ Models with Test Button MY2IN MY4IN 264 General-purpose Relay 2.6 Eight, 1.2 dia. × 2.2 long holes 0.5 28 max. 6.4 ...
Page 7
Terminal Arrangement/Internal Connections (Bottom View) MY2 MY2N/MY2IN (AC Models) MY2N-CR/MY2IN-CR (AC Models Only) MY4(Z) MY4(Z)N/MY4(Z)IN (AC Models) MY4(Z)N-CR/MY4(Z)IN-CR (AC Models Only) MY2N/MY2IN MY2N-D2/MY2IN-D2 (DC Models) (DC Models Only) MY2N1/MY2IN1 MY2N1-D2/MY2IN1-D2 (DC Models Only) (DC Models Only) MY4(Z)N/MY4(Z)IN MY4(Z)N-D/MY4(Z)IN-D2 (DC ...
Page 8
... Socket PYF14S Clip & release lever PYCM-14S Nameplate R99-11 Nameplate for MY Socket bridge PYDM-14SR Note: For complete specifications, see the datasheet at Omron's Knowledge Center on our website: www.knowledge.omron.com. ■ Sockets Poles Front-connecting Back-connecting socket socket Solder terminals (DIN-track/screw mounting) Without clip ...
Page 9
Mounting Plates for Sockets Socket model For 1 socket PY08, PY14 PYP-1 Note: PYP-18 and PYP-36 can be cut into any desired length in accordance with the number of Sockets. ■ DIN Rail Track and Accessories Description Mounting rail ...
Page 10
Dimensions Unit: mm (inch) Socket Dimensions PYF08A-E Two, 4 Eight mounting sems screws holes 72 max. 23 max. PYF14A-E Two, 4 mounting holes 72 max. 29.5 max. PY08/PY08-Y1 (See note) 42 max. ...
Page 11
Socket Dimensions PYF08A-N 22 max max. PYF-08A PYF14A ...
Page 12
Socket Dimensions PYF14S 31 max. 85 max. PYF08S 23.2 max. 85 max. Socket Bridge Insulating coating L 1.4 dia. conductor (See note 1.) Model number Length L (mm) PYDM-14SR 27.5±0.3 PYDM-14SB PYDM-08SR 19.7±0.3 PYDM-08SB Note: 1. The relationship between the ...
Page 13
Clip and Release Levers PYCM-14S PYF14S Lever 26.5 typ. 21.5 typ. ■ Hold-down Clips PYC-A1 PYC-A1 (2 pcs per set) (2 pcs per set) 36.3 4.5 1.2 4.5 PYC-P PYC max. 3.3 38.5 PYCM-08S PYF08S Lever 28 ...
Page 14
Mounting Plates for Back-connecting Sockets PYP-1 PYP-1 Two, 3.4-dia. holes t=1.6 PYP-18 PYP-18 72 elliptical holes ■ Mounting Track and Accessories DIN Rail Track PFP-50N/PFP-100N Note: The figure in the parentheses is for PFP-50N. PFP-100N2 End Plate PFP-M 272 ...
Page 15
Spacer PFP-S ■ Approved Standards VDE Recognitions (File No. 112467UG, IEC 255, VDE 0435) No. of poles Coil ratings 2 6, 12, 24, 48/50, 100/110 110/120, 200/220, 220/240 VAC 4 6, 12, 24, 48, 100/110, 125 VDC UL Recognized (File ...
Page 16
SEV Listings (File No. 99.5 50902.01) No. of poles Coil ratings 240 VAC 6 to 125 VDC 4 Note: 1. The rated values approved by each of the safety standards (eg., UL, CSA, VDE, and SEV) may ...
Page 17
Examples of Applicable Wires (Confirmed Using Catalog Information) Type of wire Conductor type Equipment wire 2491X Flexible BS6004 Solid Switchgear BS6231 Solid Switchgear BS6231 Flexible Tri-rated control and switchgear Flexible Conduit Stranded UL1007 Flexible UL1015 Flexible UL1061 Flexible UL1430 Flexible ...
Page 18
... General-purpose Relay General Precautions • Use the clip to prevent relays floating or falling out of the socket. • Do not use the product if it has been dropped on the ground. Drop- ping the product may adversely affect performance. • Confirm that the socket is securely attached to the mounting track before wiring ...
Page 19
... Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’ ...
Page 20
... THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ...