G2R-1S-DC12 Omron, G2R-1S-DC12 Datasheet - Page 10

• Manufacturer Part Number: G2R-1S-DC12
• Description: RELAY SPDT 10A 12VDC QC TERM
• Manufacturer: Omron
• Series: G2RSr

Specifications of G2R-1S-DC12

• Relay Type: General Purpose
• Contact Form: SPDT (1 Form C)
• Contact Rating (current): 10A
• Switching Voltage: 440VAC, 125VDC - Max
• Coil Type: Standard
• Coil Current: 43.2mA
• Coil Voltage: 12VDC
• Turn On Voltage (max): 8.4 VDC
• Turn Off Voltage (min): 1.8 VDC
• Mounting Type: Socket
• Termination Style: Quick Connect - .187" (4.7mm)
• Circuit: SPDT (1 Form C)
• Contact Rating @ Voltage: 10A @ 250VAC
• Control On Voltage (max): 8.4 VDC
• Control Off Voltage (min): 1.8 VDC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: G2R-1-S-DC12; G2R1SDC12; Z851

Mounting Height of Relay with Back-connecting Sockets
Mounting Tracks
End Plate
Precautions
254
15 (0.59)
44.5
(1.75)
PFP-M
G2R-@P
Do not use the test button for any purpose other than testing. Be
sure not to touch the test button accidentally as this will turn the
contacts ON. Before using the test button, confirm that circuits, the
load, and any other connected item will operate safely.
Check that the test button is released before turning ON relay cir-
cuits.
If the test button is pulled out too forcefully, it may bypass the mo-
mentary testing position and go straight into the locked position.
Use an insulated tool when you operate the test button.
PFP-100N, PFP-50N
(0.18)
!CAUTION
!CAUTION
!CAUTION
!CAUTION
4.5
It is recommended to use a panel 1.6 to 2.0 mm thick.
25
General-purpose Relay
G2R Relay
P2R-_P
Socket
10
1,000 (39.37)
or 500 (19.68)
25 (0.98)
(1.97)
50
25
(0.45)
11.5
10 (0.39)
(1.50)
38.0
G2R-@A
10 (0.39)
25
M4 x 8 pan
head screw
(0.29±0.006)
G2RS-(S)
or 5 (0.20)
15(0.59)
7.3±0.15
35±0.3
G2R Relay
P2R-_A
Socket
10 (0.39)
6.2 (0.24)
1 (0.04)
1.3 (0.05)
4.8 (0.19)
(0.07)
27±0.15
1
1.8
(1.40)
1.8 (0.07)
35.5
(1.39)
35.3
G2R-@7P
15 (0.59)
PFP-100N2
4.5 (0.18)
(1.87)
47.5
Spacer
Precautions for P2RF-@-S Connection
• Do not move the screwdriver up, down, or from side to side while it
• Do not insert the screwdriver at an angle. Doing so may break the
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the clamp spring or cracks in the
housing) or cause deterioration of insulation.
side of the socket and result in a short-circuit.
PFP-S
25
10
25 (0.98)
(39.37)
1,000
25
10 (0.39)
25 15
(1.38±0.01)
5 (0.20)
35±0.3
(1.06)
27
44.3
(1.74)
1 (0.04)
(0.94)
24
16 (0.63)
12 (0.47)
16.5 (0.65)
16 (0.63)
1.5 (0.06)
(1.15)
29.2
34.8
(1.37)