ASX2204H Panasonic Electric Works, ASX2204H Datasheet - Page 3

RELAY LATCHING 10MA 4.5VDC PCB

ASX2204H

Manufacturer Part Number
ASX2204H
Description
RELAY LATCHING 10MA 4.5VDC PCB
Manufacturer
Panasonic Electric Works
Series
ASXr
Datasheet

Specifications of ASX2204H

Relay Type
Telecom
Circuit
DPDT (2 Form C)
Contact Rating @ Voltage
0.01A @ 10VDC
Coil Type
Latching, Dual Coil
Coil Current
15.6mA
Coil Voltage
4.5VDC
Control On Voltage (max)
3.6 VDC
Mounting Type
Through Hole
Termination Style
PC Pin
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Control Off Voltage (min)
-
Other names
255-1591
255-1591-5
255-1591
2. Specifications
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
REFERENCE DATA
1. Switching capacity range
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Thermal
electromotive force
Conditions
Unit weight
Characteristics
10mA
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
10 A
actual load.
1mV
Arrangement
Static contact resistance
(During initial and electric life tests)
Dynamic contact resistance
(During initial and electric life tests)
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*
Nominal operating
power
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Surge breakdown
voltage (Initial)
Temperature rise (at 20 C
Operate time [Set time] (at 20 C
Release time [Reset time] (at 20 C
Shock resistance
Vibration resistance
Mechanical
Electrical
Conditions for operation, transport and storage*
Max. operating speed (at rated load)
Contact voltage
10V
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Single side stable
1 coil latching
2 coil latching
Between open contacts
Between contact and coil
Between contact sets
Between open contacts
Between contacts and coil
Functional
Destructive
Functional
Destructive
Item
68
F)
68
68
2-(1). Change in dynamic contact resistance
(10 mA 10 V DC resistive load)
Tested sample: ASX20012, 10 pcs.
Operating speed: 750 cpm
Measured condition: 10 ms after applying nominal coil
voltage, using voltage drop of 20 mV, 1 mA, 1 kHz.
F)
F)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
1
0
0
2
2 Form C
Max. 100 m (By voltage drop of 20 mV 1 mA [1kHz])
(By nominal switching capacity: No. of operations: 10
Max. 1
nominal coil voltage) (By nominal switching capacity: No. of operations: 10
Stationary contact: AgPd+Au clad Movable contact: AgPd
10 mA 10 V DC (resistive load)
0.1 W (resistive load)
10 V DC
10 mA DC
10 A 1 mV DC
50mW (1.5 to 12 V DC), 70mW (24 V DC)
35mW (1.5 to 12 V DC), 50mW (24 V DC)
70mW (1.5 to 12 V DC), 150mW (24 V DC)
Min. 10,000M
Measurement at same location as “Initial breakdown voltage” section.
750 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10 160 s) (FCC Part 68)
2,500 V (2 10 s) (Telcordia)
Max. 50 C
(By resistive method, nominal coil voltage applied to the coil; contact carrying current:
10mA.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Min. 750 m/s
Min. 1,000 m/s
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10 s.)
10 to 55 Hz at double amplitude of 5 mm
Min. 5
Min. 10
Max. 3 V (at nominal voltage applied to the coil)
Ambient temperature: –40 C to +70 C
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
750 cpm
Approx. 2 g
No. of operations,
7
10
(10 mA 10 V DC resistive load) (at 750 cpm)
(By voltage drop of 20 mV 1 mA [1 kHz], Measurement delay 10 ms after applying
7
.071 oz
(at 750 cpm)
2
(Half-wave pulse of sine wave: 6 ms; detection time: 10 s.)
2
(at 500V DC)
(Half-wave pulse of sine wave: 6 ms.)
10
4
1,000
Max.
Min.
–40 F to +158 F
Specifications
2-(2). Change in dynamic contact resistance
(10 A 1 mV DC resistive load)
Tested sample: ASX20012, 10 pcs.
Operating speed: 750 cpm
Measured condition: 10 ms after applying nominal coil
voltage, using voltage drop of 20 mV, 1 mA, 1 kHz.
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0
7
)
No. of operations,
1,000
SX (ASX)
7
)
10
4
2,000
Max.
Min.

Related parts for ASX2204H