PS7141-1B CEL, PS7141-1B Datasheet - Page 11
![SSR OCMOS FET 150MA NC 6-DIP](/photos/9/55/95590/51-6-dip_sml.jpg)
PS7141-1B
Manufacturer Part Number
PS7141-1B
Description
SSR OCMOS FET 150MA NC 6-DIP
Manufacturer
CEL
Series
PS, OCMOSr
Datasheet
1.PS7141-2B-A.pdf
(15 pages)
Specifications of PS7141-1B
Circuit
SPST-NC (1 Form B)
Output Type
AC, DC
On-state Resistance
30 Ohm
Load Current
150mA
Voltage - Input
1.2VDC
Voltage - Load
0 ~ 400 V
Mounting Type
Through Hole
Termination Style
PC Pin
Package / Case
6-DIP (0.300", 7.62mm)
Load Voltage Rating
400 V
Load Current Rating
150 mA
Relay Type
Optical Coupled Mosfet
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant, Lead free / RoHS Compliant
Other names
PS7141-1BNEC
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PS7141-1B
Manufacturer:
NEC
Quantity:
20 000
<R>
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by soldering iron
(4) Cautions
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak temperature (lead part temperature)
• Time (each pins)
• Flux
• Fluxes
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10279EJ02V0DS
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
PS7141-1B,-2B,PS7141L-1B,-2B
(heating)
to 60 s
to 10 s
260˚C MAX.
220˚C
11