PS7241-AT1 CEL, PS7241-AT1 Datasheet - Page 8

• Manufacturer Part Number: PS7241-AT1
• Description: SSR OCMOS FET W/PS701 8-SOP
• Manufacturer: CEL
• Series: PS, OCMOSr

Specifications of PS7241-AT1

• Circuit: DPST (2 Form A)
• Output Type: AC, DC
• On-state Resistance: 30 Ohm
• Load Current: 120mA
• Voltage - Input: 1.2VDC
• Voltage - Load: 0 ~ 400 V
• Mounting Type: Surface Mount
• Termination Style: Gull Wing
• Package / Case: 8-SOP
• Load Voltage Rating: 400 V
• Load Current Rating: 120 mA
• Output Device: Phototransistor
• Relay Type: Solid State
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant
• Other names: PS7241-AT1NEC

RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
(2) Dip soldering
(3) Cautions
• Peak reflow temperature
• Time of temperature higher than 210 °C
• Number of reflows
• Flux
• Temperature
• Time
• Number of times
• Flux
• Fluxes
• Avoid shorting between portion of frame and leads.
Avoid removing the residual flux with freon-based cleaning solvent.
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • [phone] • Telex 34-6393 • FAX [phone]
DATA SUBJECT TO CHANGE WITHOUT NOTICE
*
EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
100 to 160 ˚C
Recommended Temperature Profile of Infrared Reflow
*
235 °C or below (package surface temperature)
30 seconds or less
Two
Rosin flux containing small amount of chlorine
260 °C or below (molten solder temperature)
10 seconds or less
One
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
Portion of frame
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
(preheating)
60 to 120 s
Time (s)
(heating)
to 10 s
to 30 s
235 ˚C (peak temperature)
210 ˚C
Internet: http://WWW.CEL.COM
09/12/2001