H3DS-AL AC24-230/DC24-48 Omron, H3DS-AL AC24-230/DC24-48 Datasheet - Page 24
![RELAY TIME DELAY 1MODE DIN MNT](/photos/9/60/96081/h3ds-al_ac24-230_dc24-48_sml.jpg)
H3DS-AL AC24-230/DC24-48
Manufacturer Part Number
H3DS-AL AC24-230/DC24-48
Description
RELAY TIME DELAY 1MODE DIN MNT
Manufacturer
Omron
Series
H3DSr
Specifications of H3DS-AL AC24-230/DC24-48
Relay Type
Integrated
Function
On-Delay
Circuit
SPDT (1 Form C)
Delay Time
0.1 Sec ~ 120 Hrs
Output Type
Mechanical Relay
Contact Rating @ Voltage
5A @ 250VAC
Voltage - Supply
24 ~ 230VAC, 24 ~ 48VDC
Mounting Type
DIN Rail
Termination Style
Screw Terminal
Timing Adjustment Method
Screwdriver Slot
Timing Initiate Method
Input Voltage, Trigger Signal
Timing Range
0.1 s to 120 Hrs
Supply Voltage
24 V to 230 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
H3DSALAC24230DC2448
Z2392
Z2392
Operation
■ Basic Operation
Setting of Selector
The selectors can be turned clockwise and counterclockwise to
select the desired time scale, or operating mode.
Each selector has a snap mechanism that secures the selector at a
given position. Set the selector at a position at which it is secured. Do
not set it midway between two securing positions or a malfunction
could result from improper setting.
Selection of Time Unit and Time Scale
The star-delta transfer time and star operation time scale are set with
the same selector. The star-delta transfer time can be set to 0.05,
0.1, 0.5, or 1. The star operation time scale can be set to a multiplica-
tion factor of 1 or 10. If the star-delta transfer time is displayed in the
display window in white letters, this means that the star operation
time scale is “x10”. Refer to the example below.
■ Timing Charts
Note: The reset time requires a maximum of 0.5 s.
Star-delta transfer time
Star-delta transfer time and
star operation time scale
display window and selector
0.05 s
0.05 s
0.1 s
0.5 s
0.1 s
0.5 s
1 s
1 s
Power (A
Star contact
17 and 18
(star indicator)
Delta contact
27 and 28
(delta indicator)
http://www.ia.omron.com/
1
and A
2
)
ON
OFF
ON
OFF
ON
OFF
x1
x10
Star operation time scale
t
t
1
2
: Star operation time setting
: Star-delta transfer time
t
1
t
2
0.5 s
Time Setting
The star operation time of the Timer is set with the time setting dial.
Locking/Unlocking of Selectors and
Time Setting Dial
The time setting dial and time scale selector can be locked using the
Y92S-38 Lock Key, a special pen type tool that is sold separately. To
lock the dial or selectors, insert the Lock Key in the keyhole to the
lower right of the dial or selector and turn it clockwise until the dial or
selector is completely covered with the red cover. To unlock, turn the
Lock Key in the opposite direction.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
H3DS-G
Key hole
24