TL76 Fluke Electronics, TL76 Datasheet - Page 69

• Manufacturer Part Number: TL76
• Description: TEST LEAD SET 2MM/4MM
• Manufacturer: Fluke Electronics

Specifications of TL76

• Current Rating: 10A
• Termination: Banana Plug, Sheathed, Right Angle
• Color: Black and Red - Plugs, Probes and Wire
• Cable Length: 59.055" (1500.00mm)
• Ratings: CAT IV, 600V; CAT III, 1000V
• Wire Insulation Material: Silicone
• Includes: Pin Tip, Lantern Tip (Removable)
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Voltage - Max: -
• Impedance: -
• Other names: 2032684

80TK Thermocouple Module
•
•
•
•
•
80T-150U Universal Solid State
Temperature Probe
•
•
•
•
80AK DMM Adapter
•
•
•
80BK Integrated DMM
Temperature Probe
•
•
•
•
BP717
•
•
BP75
•
•
700LTP Low Pressure
Test Pump
The Fluke 700LTP is designed
to generate either vacuum to
-12 psi/-.85 bar or pressures to
30 psi/2000 mbar. The Fluke
700 LTP is primarily intended
for low pressure applications.
700ILF In-line Filter
The Fluke 700ILF can be used
to isolate the calibrator from
incidental contact with fluids.
Particularly useful with the 718
calibrator to help keep moisture
or oils from contaminating the
on-board pump.
For more information and detailed specifications, go to www.fluke.com/accessories
Other temperature accessories
Process tools accessories
Converts K-Type thermocouple
signals into mV output
Connects to DMM via
standard banana plugs
Switch selectable °C or °F
Range: -50 °C to 1000 °C
(-58 °F to 1832 °F)
Includes 80PK-1 probe
For measurement of air, surface
and non-corrosive materials
Measurement range:
-50 °C to 150 °C
(-58 °F to 302 °F)
Output: 1 mV/°C or 1 mV/°F
(switch selectable)
Connects to DMM via standard banana plugs
Adapts K-type thermocouple
mini-connector to dual banana
plug inputs
Compatible with all Fluke
DMMs with temperature
measurement functions
Measurement range and accuracy
is not affected by the 80AK adapter
Compatible with all Fluke DMMs
with temperature measurement
functions
K-Type thermocouple with
standard banana jack
Convenient one-piece construction
Measurement range: -40 °C to 260 °C
(-40 °F to 500 °F)
NiCd rechargeable battery;
nominal 7.2 volt, 1700 mA hr
Use in 867B meters or 700
and 740 Series Calibrators
NiMH rechargeable battery;
nominal 7.2 Volt, 3500 mA hr
Use in 700 and 740 Series
Calibrators
Fluke Temperature
Turn your digital multimeter
80CK-M and 80CJ-M
Type K and J Male
Mini-Connectors
•
•
•
•
80PJ-EXT, 80PK-
EXT, 80PT-EXT
Thermocouple Wire
Extension Kits
For extending and
repairing J, K or T-type
thermocouple wires.
•
•
•
700PTP Pneumatic
Test Pump
The 700PTP is a handheld
pressure pump designed to
generate either vacuum to
-11.6 psi/-0.8 bar or pressure
to 600 psi/25 bar.
700HTP Hydraulic
Test Pump
The 700HTP is designed to
generate pressures up to
10,000 psi/700 bar. Use the
Fluke-700PRV adjustable
relief valves to limit pressures
to 1360 psi and 5450 psi.
700HTH Hydraulic
Test Hose
The 700HTH is a 10,000
psi, 700 bar test hose that
connects to a calibration
unit under test from a Fluke
700HTP hydraulic test pump.
into a thermometer
Isothermal screw terminal
for K or J wire
Suitable for up to 20
gauge thermocouple wire
Color coded to industry
standards (K-yellow,
J-black)
Two per package
Kit includes 3 m (approx.
9 ft.) of thermocouple
wire and 1 pair of
male/female
mini-connectors
Maximum continuous
exposure temperature:
260 °C (500 °F)
80PK-EXT is compatible
with K-type thermometers;
80PJ-EXT is designed for
J-Type thermometers, and
80PT-EXT is designed for
T-type thermometers
accessories
700PMP Pressure
Pump
The 700PMP is a hand-
operated pressure pump
to provide pressures up to
150 psi/1000 kPa. Output
fitting is 1/8 FNPT.
Fluke 700-IV Current
Shunt
Conversion factor:
10 mV = 1 mA
Accuracy (% of input,
1 year): 0.025 %
Input current:
0 to 55 mA
Input resistance:
250 W nominal
Output resistance:
10 W nominal
Accuracy specification
applies from +18 °C and
28 °C to 50 °C
Maximum input voltage:
30 V dc
Thermocouple
Plug Kits
700TC1
A kit of 10 mini-plug
connectors. One each
of the following:
Type J (black)
Type K (yellow)
Type T (blue)
Type E (purple)
Type R/S (green)
Type B or Cu (white)
Type L (J-DIN) (blue)
Type U (T-DIN) (brown)
Type C (red)
Type N (orange)
700TC
A kit of 7 mini-plug
connectors.
Type J (black), two
Type K (yellow), two
Type E (purple), one
Type T (blue), one
Type R/S (green), one
New!
80PR-60 RTD
Temperature
Probe
•
•
•
Resistance
temperature
detector probe
designed to
add contact measurements to your
Fluke 66 and 68 Non-Contact Infrared
Thermometers
Measurement range: -40 °C to 260 °C
(-40 °F to 500 °F)
3.5 mm phono type jack is only
appropriate for Fluke 66 and 68
Thermometers
Accessories
69