TL40 Fluke Electronics, TL40 Datasheet - Page 38

• Manufacturer Part Number: TL40
• Description: TEST LEAD SET RETRACTABLE TIPS
• Manufacturer: Fluke Electronics

Specifications of TL40

• Current Rating: 3A
• Termination: Banana Plug, Sheathed, Right Angle
• Color: Black and Red - Plugs and Probes; Gray - Wire
• Ratings: CAT III, 300V
• Wire Insulation Material: Silicone
• Includes: Needle Tip, Retractable 0-3" (0-76mm)
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Voltage - Max: -
• Impedance: -
• Cable Length: -
• Other names: 1590606

8
Specifications – 741B, 743B and 744
Recommended accessories – 71B, 7B and 7
For more information and detailed specifications, go to www.fluke.com/740
Process Calibration Tools
Function
DC voltage
DC current
Resistance
Frequency
Thermocouples
RTDs
Pressure
Accessory Case
See page 70
For the calibration and troubleshooting
Meter and
C789
0.05 % reading + 50 mW
of process control instrumentation
0.025 % reading +
0.005 % full scale
0.015 % full scale
0.01 % reading +
Measure
0.05 %
Fluke 741B, 743B and
0.3 °C
0.3 °C
To 0.25 % of full scale, per pressure
Fluke-700PTP
See page 69
Test Pump
Pneumatic
module specifications.
•
•
•
•
•
•
•
•
•
•
•
7: Get HART-ability
The Fluke 744 offers all of the capabilities of the 743B, plus
the ability to calibrate, maintain, and troubleshoot HART
instrumentation. Integrated HART communication functions
permit you to monitor, control, and calibrate HART instru-
mentation. It handles fast pulsed instruments such as RTD
transmitters and PLCs, with pulses as short as 1 ms.
See www.fluke.com/7upgrade for the latest list of
HART instruments.
71B: A complete documenting calibrator
The 741B is the economical choice for plants that don’t use
PCs or that require traditional paper forms. It has storage
capacity for a day’s calibration and measurement data. When
you’re back at the shop, recall the data on-screen to fill out
calibration forms.
7B: More memory, plus a PC interface
and data logging
The 743B has all the capabilities of the 741B plus a PC
interface that lets you load procedures, lists, and instructions
created with software—or unload data for printing, archiving,
and analysis. With its expanded memory, the 743B can hold
a full week of calibrations and procedures.
Calibrate temperature, pressure, voltage, current,
resistance and frequency instruments
Built-in procedures for transmitters, square root
transmitters, pressure and temperature switches
Simultaneously measure and source
Automatically capture calibration results
Document procedures and results to meet ISO 9000,
EPA, FDA, OSHA, and other government requirements
Measure/simulate 13 types of thermocouples and
eight RTDs
Store up to 8,000 readings in data logging mode
(743B and 744 only)
Protected against dirt, dust and moisture; unaffected
by vibration
Includes a PC interface (743B and 744 only)
Operate in English, French, German, Italian and Spanish
Offer one- and two-year calibration cycles and a
three-year warranty (one-year for pressure modules)
0.01 % output + 40 mW
0.005 % full scale
0.015 % full scale
0.01 % output +
0.01 % output +
744 Calibrators
Sourcing
Pressure Modules
0.01 %
Fluke-700Pxx
0.2 °C
0.1 °C
See page 41
Temperature Probe
SureGrip Piercing
See page 68
Summary specifications: best case,
midrange, one-year.
Battery life: Typically over eight hours
Internal battery pack: NiCd, 7.2 V,
1700 mAh, NiMH 3500 mAh on 744.
Battery replacement: Via snap-shut
door without opening calibrator; no
tools required
Weight: 1.4 kg (3 lb 1 oz)
Size (HxWxD): 236 mm x 130 mm x
61 mm (9.3 in x 5.1 in x 2.4 in)
80PK-5
SureGrip Industrial
Test Lead Set
See page 61
TL0
Instrumentation
management software
The Fluke 743B and 744 are compatible
with Fluke 700SW DPC/TRACK software
and with software from Beamex,
Cornerstone, Emerson, Honeywell,
On Time Support, Prime Technologies,
Yokogowa, Intools and Meridium.
For more information, visit
www.fluke.com/software
Application note, literature code
1262439:
HART
calibration
The need for calibration of HART
smart transmitters is often misun-
derstood. What do you calibrate and
when? Here is a step-by-step
procedure showing how to use the
Fluke 744 to perform calibration and
digital adjustments of Rosemount
3051 and 3144 transmitters and
other HART devices.
Included accessories
TL224 Industrial Test Leads (2 sets),
AC220 Test Clips (2 sets), TP220
Test Probes, BP7217 Battery Pack,
BC7217 Battery Charger, instruction
manual, NIST Traceable calibration
certificate and data, serial port cable
(743B and 744 only), DPC/TRACK
sample version with free PC commu-
nication utility software (743B and
744 only).
Additional 7 accessories
BP7235 NiMH Battery Pack, HART
communications cable, HART user’s
manual and NIST Traceable calibra-
tion certificate and data.
Ordering information
Fluke-741B Documenting Process
Fluke-743B Documenting Process
Fluke-744
Fluke-700S DPC/Track
Pressure
Enabled
®
transmitter
Calibrator
Calibrator
Documenting Process
Calibrator
Software