58603-1 Tyco Electronics, 58603-1 Datasheet - Page 5
![no-image](/images/manufacturer_photos/0/6/687/tyco_electronics_sml.jpg)
58603-1
Manufacturer Part Number
58603-1
Description
TOOL HAND PROCRIMP JPT W/DIE
Manufacturer
Tyco Electronics
Datasheet
1.58603-1.pdf
(5 pages)
Specifications of 58603-1
Lead Free Status / RoHS Status
Not applicable / Not applicable
Features
-
For Use With/related Products
-
Tool Type
-
9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
Rev
PRO-CRIMPER III Hand Crimping Tool Assembly 58603-1
A
Ratchet
Adjustment
Wheel
Lockscrew
(Typ)
Screwdriver
Figure 5
Tyco Electronics Corporation
10. REPLACEMENT
Customer–replaceable parts are shown in Figure 1.
Available separately, PRO–CRIMPER III Hand
Crimping Tool Repair Kit 679221–1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
If the dies are damaged or worn excessively, they
must be replaced.
Order the repair kit and replaceable parts through
your Tyco Electronics representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 717–986–7605, or write to:
11.REVISION SUMMARY
Since the previous release of this instruction sheet,
the following changes have been made:
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105–3608
S PRO–CRIMPER II Hand Tool became the
S The TE logo was applied; and
S The format was updated to the current
PRO–CRIMPER III Hand Tool;
corporate requirements.
408-4342
5
of 5