11-01-0204 Molex Inc, 11-01-0204 Datasheet - Page 4

• Manufacturer Part Number: 11-01-0204
• Description: TOOL HAND CRIMP 2MM CONTACTS
• Manufacturer: Molex Inc
• Series: Milli-Grid™r

Specifications of 11-01-0204

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• For Use With/related Products: Rectangular Contacts, 24-30 AWG
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 0011-01-0204; 0011-01-0204-E; 0011010204; 0011010204-E; 11-01-0204-E; 11010204; 11010204-E; CR60927A; WM18057

Hand Crimp Tool for Milli-Grid™ Crimp Terminal
Doc No: ATS-011010204
Revision: E
Notes:
1. This tool should only be used for the terminals and wire gauges specified on this sheet.
2. This tool is not adjustable for crimp height; however crimp force is adjustable (See instructions above).
3. This tool is intended for standard conductor sizes. It may not give a good insulation crimp support for all
4. Molex does not repair hand tools (see warranty above). The replacement parts listed are the only parts
5. Pull force should be used as the final criteria for an acceptable crimp. Pull force is measured with no
6. Molex does not certify crimp hand tools.
Variations in tools, terminals, and wire stranding and insulation types may affect crimp height.
insulation sizes.
available for repair. If the handles or crimp tooling is damaged or worn, a new tool must be purchased.
influence from the insulation crimp. The insulation should be stripped long (1/2 in.) so the insulation grips on
the terminal do not grip the wire insulation or the conductor. Refer to Molex Quality Crimping Handbook
63800-0029 for additional information on crimping and crimp testing.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals, applicators and
tooling.
Release Date: 03-02-93
Revision Date: 04-14-08
UNCONTROLLED COPY
Page 4 of 5