90869-2 Tyco Electronics, 90869-2 Datasheet - Page 5
![DIE SET 24-18 AWG USE WITH A9996](/photos/9/90/99015/90869-2_sml.jpg)
90869-2
Manufacturer Part Number
90869-2
Description
DIE SET 24-18 AWG USE WITH A9996
Manufacturer
Tyco Electronics
Series
Pro-Crimper™ IIIr
Datasheet
1.90869-1.pdf
(6 pages)
Specifications of 90869-2
Connector Type
Crimp Terminals
Crimp Handle
A9996-ND
Crimp Or Cable Size
18-24 AWG
(1.57) Soft-shell Commercial Pin And Socket Connectors ,tyco Electronics / Amp
ROHS COMPLIANT
Lead Free Status / RoHS Status
Not applicable / Not applicable
For Use With
A9820 - TOOL CRIMP .062 AWG 24 W/DIE
Lead Free Status / RoHS Status
Not applicable / Not applicable
Other names
A9957
9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
10. REPLACEMENT
Customer--replaceable parts are shown in Figure 1.
Available separately, PRO--CRIMPER III Hand
Crimping Tool Repair Kit 679221--1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
If the dies are damaged or worn excessively, they
must be replaced.
Order the repair kit and replaceable parts through
your Tyco Electronics representative, or call
Rev C
Tyco Electronics Corporation
1--800--526--5142, or send a facsimile of your
purchase order to 1--717--986--7605, or write to:
11.REVISION SUMMARY
Revisions to this instruction sheet include:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG PA 17105--3608
S
S
S
S
S
Changed PRO--CRIMPER II Hand Tool to
PRO--CRIMPER III Hand Tool;
Changed Crimp--Height Comparator
information;
Updated format to current corporate
requirements;
Applied the TE logo; and
Added back page to illustrate tooling varieties
that accept Die Set Assembly 90869--2.
5 of 6