UT-100SI Master Appliance Co, UT-100SI Datasheet - Page 3

• Manufacturer Part Number: UT-100SI
• Description: TOOL HEAT ULTRTRCH BUTANE SLDR
• Manufacturer: Master Appliance Co
• Series: Ultratorch®r
• Type: Butane Torch, Flamelessr

Specifications of UT-100SI

• Temperature Range: 1202°F (650°C)
• Features: Includes: Heat Gun, Case and 3 Nozzles
• Rohs Compliant: NA
• Length: 10.3 in.
• Power, Rating: 20 to 80
• Weight: 5.5 Oz.
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Voltage: -
• Power - Rated: -
• Lead Free Status / Rohs Status: RoHS Exempt Product
• Other names: MA1024; UT-100SI

Warnings
WARNING: This product, when used for soldering and similar applications, produces chemicals
known to the State of California to cause cancer and birth defects or other reproductive harm.
WARNING: By-products of the combustion of the fuel used by this product contain chemicals
known to the State of California to cause cancer and reproductive harm.
WARNING: The Department of Transportation Hazardous Material Regulations forbid the carriage
of butane or other flammable gas products on passenger aircraft. Do not pack this item or any
other flammable gas item, in any checked or carry-on luggage.
To reduce the risk of injury or
property damage, READ AND
UNDERSTAND the following
warnings:
1. To prevent fire or damage to work
2. To prevent fuel tank leakage, do
3. Be sure to turn “ON/OFF” switch to
4. Do not perform maintenance or re-
5. Wait for tips to cool before chang-
6. When soldering or desoldering
Important Safety Instructions
ing. Keep hands and combustibles
from tip area while in use.
always review material safety data
sheets (MSDS) for recommended
precautions for safe handling and
surfaces, be sure hot air exhaust
opening is positioned up. Hot air
comes out of the exhaust opening
in the tip. Keep combustibles and
hands away from the opening.
not store in environmental area
that exceeds 104°F/40°C (such
as car dashboard or trunk, direct
sun, glove compartment, or other
enclosed, unventilated areas).
“OFF” after use.
pair unless unit is completely cool.
Be certain “ON/OFF” lever is “OFF”.
7. Store away from, and do not use
8. Keep protective cap on unit while
9. Use only in well-ventilated area.
10. Do not expose to open flame or
11. To prevent clouding of window,
12. Use only Master Appliance
13. Always use safety glasses or
14. Do not fill gas or store near open
15. Do not misuse, abuse, alter or tamper.
use of solder, solder paste, flux,
conformal coatings and any other
chemicals.
in the presence of children.
not in use.
Continuous or extended use
indoors should be done only with
a local exhaust ventilation to the
outside.
other sources of high temperature.
do not use alcohol or alcohol-
based cleaner.
Ultratane Butane Fuel to insure
maximum safety and perfor-
mance. MSDS upon request.
goggles.
flame, heater, furnace or com-
bustible materials.
16. It is your responsibility to follow
NOTE: When operating in extremes
of temperature (hot or cold), at high
altitude, ignition may be difficult
due to the variation of gas pressure
caused by these extremes. Gas
control settings will also be affected
and will vary from those under normal
conditions. If difficulties are experi-
enced, please contact our Customer
Service Department who will advise
on adjustment.
your governmental regulations
when disposing of this unit.