3443-127F 3M, 3443-127F Datasheet - Page 3
![no-image](/images/manufacturer_photos/0/0/1/3m_sml.jpg)
3443-127F
Manufacturer Part Number
3443-127F
Description
LOCATOR PLATE .050" SOCKET E
Manufacturer
3M
Datasheet
1.3443-127A.pdf
(4 pages)
Specifications of 3443-127F
Tool Type
Guide Plate, Locator
Lead Free Status / RoHS Status
Vendor undefined / Vendor undefined
Other names
0-00-51111-61856-1
00051111618561
05111161856
3443127F
5111161856
51111618561
80-4000-1622-8
80400016228
00051111618561
05111161856
3443127F
5111161856
51111618561
80-4000-1622-8
80400016228
Connector Assembly
Note:
connectors being positioned on the locator plate while it is
on the table top. This can also be done while the plate is in
position on the press.
1. Place the cover in the groove on the locator plate
2. Place the cable in the cable track, on top of the
3. Make sure that the tips of the ejector latch on the
4. Place the connector body on top of the cable
5. If you did the assembly on the table top, place the
and between the two cover stops.
cover and up against the cable stop (end
termination). Maintain pressure on the cable with
your hand to keep the cable in position.
connector are pushed in toward the center of the
connector.
engaging the protruding cover latches with the
appropriate slots on the connector body. The
connector may be pressed down by hand for an
initial placement. You will hear a clicking sound
when the connector has been pressed down an
appropriate distance.
locator plate and cable and connector together onto
the base of the assembly press. Be sure that the
cable does not move and that the connector does
not slip out of the groove on the locator plate.
For clarity, the pictures show the cable and
3
Step 2
Connector Assembly Steps 3, 4, 5
Connector Assembly Step 2
Connector Assembly Step 1
Cover Stop
Ejector Latch
Cover Stop
Connector
Placement
78-8133-3480-8-B