MET-DT Panduit Corp, MET-DT Datasheet - Page 22

• Manufacturer Part Number: MET-DT
• Description: PENCIL ENGRAVE DIAMOND TIP METAL
• Manufacturer: Panduit Corp
• Series: Pan-Steel™r

Specifications of MET-DT

• Tool Type: Engraver, Diamond tip accessory
• For Use With/related Products: Stainless Steel Cable Ties, Straps, Marker Plates/Tags

PANDUIT P
Unique Patented Locking Method
22
The PANDUIT Method Reduces Installation Time
1. Place strap around the material, inser t
tail of strap through buckle. Pull strapping
tight and bend up to hold in place. Insert
tail of strapping into tool nose section.
Squeeze handles to tension.
Part Number
System
Example
(Stock Size Straps)
Buckle design
provides a low
finished profile
AN
Stainless Steel Strapping System
-S
TEEL
Part
Description
Metal
Strapping
MS
™
Stainless Steel Strapping System
2. Once proper tension is reached,
maintain tension and raise tool 90° - 120°
over buckle and tur n parallel with the
bundle, cutting strap. Remove tool, press
cut end down and toward retaining tab.
Bundle
Diameter
Reference
8
The PANDUIT P
installation time and leaves no sharp edges.
• 3 widths available: 3/8 in. (9.5 mm), 1/2 in. (12.7 mm), and
• Burr-free sides
• Non-magnetic 304 stainless steel
• Designed for use in cr itical applications where radiation, weathering,
• Temperature range: –112° F (–80° C) to 1000° F (538° C)
• Fast and reliable alternative to wing seals
5/8 in. (15.9 mm)
corrosion, and temperature extremes are a concern
X
Cross Section
375 X 15 = .375 in. (9.5mm)
500 X 15 = .500 in. (12.7mm)
500 X 20 = .500 in. (12.7mm)
625 X 15 = .625 in. (15.9mm)
375 X 15
AN
X .015 in. (0.38mm)
X .015 in. (0.38mm)
X .020 in. (0.51mm)
X .015 in. (0.38mm)
-S
T EEL
stainless steel strapping system reduces
3. Using the closure lever on the
handle of the tool, bend retaining tab
down and over cut end. Provides
finished, safe, low profile closure.
–
After tensioning, cut
end is locked inside
buckle—no exposed
sharp edge
Package
Qty.
L = 50
L
Material
S = 304
Stainless Steel
S