ZX-TDA41 2M Omron, ZX-TDA41 2M Datasheet - Page 3

• Manufacturer Part Number: ZX-TDA41 2M
• Description: AMP UNIT 12-24VDC PWR SPLY PNP
• Manufacturer: Omron

Specifications of ZX-TDA41 2M

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ZX-TDA412M; ZXTDA412M

Inline Measurement
Industry's Top Class Resolution
The long-stroke ZX-TDS04T@ (4-mm
measurement range) achieves high-precision
measurement with the industry's top class of
resolution (0.1 µm) and linearity of 0.3 FS max.
■
ZX-TDS10T-@@ long-range type
Resolution: 0.4 mm, Linearity: ±0.5% FS
The Smart Answer to High-precision Measuring Applications
that Were Difficult with Non-contact Types
Fully Compatible Sensor Heads
and Amplifier Units
When changing measurement distances or
replacing a damaged Sensor Head, you can
continue using the same Amplifier Unit.
0.5% FS Products
Previous
0.3% FS Linearity
ZX-TDS@@
Measurement value
Resolution
Ultra-low-load Type
(
Since micropressure contact is achieved
using the Actuator's own weight, these
Sensor Heads are ideal for taking
measurements where non-contact Sensors
cannot be used, such as on transparent and
glossy products or products that are easily
scratched or warped
0.065 N)
ZX-TDA11
Note:
Automate Measurements with
Vacuum-retracting Type
(Air Lifter Type).
Switching from dial gauges to automatic
inspection is a snap with the ZX-TDS10T-V.
Meanwhile, the ZX-TDS10T-VL can control
air push models in addition to air lift models
so that contact force can now be controlled
externally.
Multi-point Calculation
The multi-point calculation method
allows up to 8 Sensor Heads to be
connected at one time. Multiple-
point
computed based on one Sensor
Head yields up to 7 outputs. Analog
outputs do not have to be written to
a PLC or A/D Board to perform
calculations.
All measurement data can be input
to a PLC quickly and easily through
the Communication Interface Unit.
A ZX-CAL2 Calculating Unit is required for
calculations. An optional ZX-SFW11 or
ZX-SF11 Communication Interface Unit is
also required for PC/PLC connection.
addition
and
subtraction