EEF-WA0J561P Panasonic - ECG, EEF-WA0J561P Datasheet - Page 7

• Manufacturer Part Number: EEF-WA0J561P
• Description: CAP 560UF 6.3V SPEC POLYMER SMD
• Manufacturer: Panasonic - ECG
• Series: SP-Cap WAr

Specifications of EEF-WA0J561P

• Capacitance: 560µF
• Voltage Rating: 6.3V
• Tolerance: ±20%
• Lifetime @ Temp.: 2000 Hrs @ 105°C
• Operating Temperature: -55°C ~ 105°C
• Features: Polymer
• Ripple Current: 5.1A
• Esr (equivalent Series Resistance): 20.0 mOhm
• Mounting Type: Surface Mount
• Package / Case: Radial, Can - SMD
• Size / Dimension: 0.394" Dia (10.00mm)
• Height: 0.402" (10.20mm)
• Surface Mount Land Size: 0.406" L x 0.406" W (10.30mm x 10.30mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Spacing: -
• Other names: EEFWA0J561P; PCE2134TR

Design, Specifications are subject to change without notice.
about safety comes up with this product, please contact us immediately for engineering assistance without fail. Specifications are typical and may not apply to all applications.
Specialty Polymer Aluminum Electrolytic Capacitors (V type WA series)
No
1
2
3
4
5
6
7
5. Characteristics
Leakage
Capaci-
tan
ESR
Solder-
ability
Solubility
resistance
to
marking
Solder
heat
resistance
current
Item
tance
See product specification
on Page 2.
See product specification on Page 2.
More than 75% of the terminal face is
covered by new solder.
Appearance: No remarkable abnormal
Leakage
Capacitance
tan
Appearance
Electrolytic Capacitor Product Specification
±20%
I
current
change
LCR Device Company Capacitor Business Unit
0.2CV
Matsushita Electronic Components Co., Ltd
change shall be occurred.
Characteristics
with "Pre-conditioning"
±10% of initial measured
value.
Item 3.
No remarkable abnormal
change shall be occurred.
The value specified at
Contact your nearest Panasonic sales office for the latest specifications prior to purchase and/or use.
nitia specified value
Series resistor: 1000
Applied voltage: Rated Voltage
Leakage current shall be measured 2 minutes after applying
voltage. If any doubts come up, conduct “Pre-conditioning”
described below and measure leakage current again.
Pre-conditioning
Measuring frequency:120Hz±10%
Measuring circuit: Equivalent series circuit
Measuring voltage: +2.1 to 2.5V.DC 0.5Vrms
Measuring temperature: +20°C
·Temperature: 105°C
·Applied voltage: Rated Voltage ·Charge time: 2hour
·Measuring
After “Pre-conditioning” the capacitor shall be
stored at room temperature and low humidity for
24 to 48 hours, then measurement shall be done.
Measuring voltage: 0.5Vrms +0V.DC
Measuring temperature: +20°C
Measuring frequency: 100KHz ± 10%
Solder type: H60A or H63A
Flax: About 25% rosin density being
Solder temperature: 235 ± 5°C
Immersing time: 2 ± 0.5s
Class of regent: Extra grade 2-propanol
Test temperature: 20 to 25°C
Immersing time: 30 ± 5s
After reflow-soldering(see page 9),
capacitors shall be left at room temperature
prior to the measurement.
melted in ethanol.
Outline of test method
·Series resistor: 1000
(JIS K8839) or superior.
WA-E-0016
Whenever any doubt
5