C1608C0G1H101G TDK Corporation, C1608C0G1H101G Datasheet - Page 6

• Manufacturer Part Number: C1608C0G1H101G
• Description: CAP CER 100PF 50V C0G 2% 0603
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C1608C0G1H101G

• Capacitance: 100pF
• Voltage - Rated: 50V
• Tolerance: ±2%
• Temperature Coefficient: C0G, NP0
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESR
• Applications: General Purpose
• Package / Case: 0603 (1608 Metric)
• Size / Dimension: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Thickness: 0.80mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Other names: 445-5374-2

* This series is available through the distribution channel only. Please see
• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — Tight Tolerance Capacitors // Version A11
No.
9
10
11
General
Specifications
Item
Solderability
Resistance to solder heat
External
appearance
Capacitance
Q (Class 1)
Insulation
Resistance
Voltage
Proof
Vibration
External
appearance
Capacitance
Q (Class 1)
Performance
New solder to cover over 75% of
termination.
25% may have pinholes or rough spots
but not concentrated in one spot.
Ceramic surface of A sections shall not
be exposed due to melting or shifting of
termination material.
No cracks are allowed and terminations
shall be covered at least 60% with new
solder.
Meet the initial spec.
No insulation breakdown or
other damage.
No mechanical damage.
Characteristics
Class 1
Characteristics
Class 1
Rated Capacitance
C ≥ 30pF
C < 30pF
Rated Capacitance
C ≥ 30pF
C < 30pF
C0G
C0G
C : Rated capacitance (pF)
C : Rated capacitance (pF)
C Series — Tight Tolerance Capacitors
Change from the
value before test
Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
Change from the
value before test
Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
A section
www.tdk.com/distributor.php
Q
1,000 min.
400 + 20×C min.
Q
1,000 min.
400+20×C min.
for a list of authorized distributors.
Test or Inspection Method
Completely soak both terminations in solder at
235±5ºC for 2±0.5s.
Solder: H63A (JIS Z 3282)
Flux: Isopropyl alcohol (JIS K 8839)
Completely soak both terminations in solder at
260±5ºC for 5±1s.
Preheating condition
Flux: Isopropyl alcohol (JIS K 8839)
Solder: H63A (JIS Z 3282)
Leave the capacitor in ambient conditions for 6 to 24h
before measurement.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Vibrate the capacitor with amplitude of 1.5mm P-P
sweeping the frequencies from 10Hz to 55Hz and back
to 10Hz after 1min.
Repeat this for 2h each in 3 perpendicular directions.
Temp.: 150±10ºC
Time : 1 to 2min.
Rosin (JIS K 5902) 25% solid solution.
Rosin (JIS K 5902) 25% solid solution.