C3225X7R2E224M TDK Corporation, C3225X7R2E224M Datasheet - Page 22
![CAP CER .22UF 250V X7R 1210](/photos/10/43/104348/940c_series_1210_3225__sml.jpg)
C3225X7R2E224M
Manufacturer Part Number
C3225X7R2E224M
Description
CAP CER .22UF 250V X7R 1210
Manufacturer
TDK Corporation
Series
Cr
Datasheets
1.C1005X7R1E103K.pdf
(1 pages)
2.C1608X7R2A102K.pdf
(26 pages)
3.C3216X7R1E155K.pdf
(17 pages)
Specifications of C3225X7R2E224M
Capacitance
0.22µF
Tolerance
±20%
Package / Case
1210 (3225 Metric)
Voltage - Rated
250V
Temperature Coefficient
X7R
Mounting Type
Surface Mount, MLCC
Operating Temperature
-55°C ~ 125°C
Features
Low ESR
Applications
General Purpose
Size / Dimension
0.126" L x 0.098" W (3.20mm x 2.50mm)
Thickness
2.00mm
Voltage Rating
250 Volts
Operating Temperature Range
- 55 C to + 125 C
Temperature Coefficient / Code
X7R
Product
General Type MLCCs
Dimensions
2.5 mm W x 3.2 mm L x 2 mm H
Termination Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Ratings
-
Lead Spacing
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
445-4502-2
• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — Mid Voltage Application // Version A11
No.
16
17
*As for the initial measurement of capacitors (Class 2) on number 8, 12, 13, 14 and 15, leave capacitor at 150 —10, 0°C
for 1 hour and measure the value after leaving capacitor for 24±2h in ambient condition.
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Life
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Performance
No mechanical damage.
200 min.
Characteristics
X7R: 200% of initial spec. max.
X7S: 200% of initial spec. max
X7T: 200% of initial spec. max
500MΩ or 25MΩ•μF min.
whichever smaller.
No mechanical damage.
350 min.
Characteristics
X7R: 200% of initial spec. max.
X7S: 200% of initial spec. max
X7T: 200% of initial spec. max
1,000MΩ or 50MΩ•μF min.
whichever smaller.
Characteristics
Class 1
Class 2
Characteristics
Class 1
Class 2
C0G
C0G
X7R
X7S
X7R
X7S
X7T
X7T
Change from the
value before test
±7.5 %
± 12.5 %
Change from the
value before test
±3 %
± 15 %
C Series — Mid Voltage Application
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2):
Voltage treat the capacitors under testing temperature
and voltage for 1 hour.
Leave the capacitors in ambient condition for 24±2h
before measurement.
Use this measurement for initial value.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply voltage at 125±2ºC for 1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2):
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.