DEA1X3D181JA2B Murata Electronics North America, DEA1X3D181JA2B Datasheet - Page 30
![CAP CER DISC 180PF 2KV SL RAD](/photos/10/45/104548/dea_series_yellow_fig_1-1617_t073_sml.jpg)
DEA1X3D181JA2B
Manufacturer Part Number
DEA1X3D181JA2B
Description
CAP CER DISC 180PF 2KV SL RAD
Manufacturer
Murata Electronics North America
Series
DEAr
Specifications of DEA1X3D181JA2B
Capacitance
180pF
Voltage - Rated
2000V (2kV)
Tolerance
±5%
Temperature Coefficient
SL
Mounting Type
Through Hole
Operating Temperature
20°C ~ 85°C
Features
High Voltage
Applications
General Purpose
Package / Case
Radial - Disc
Size / Dimension
0.354" Dia (9mm)
Thickness
5.00mm Max
Lead Spacing
0.197" (5.00mm)
Lead Style
Straight
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Ratings
-
Other names
490-4174
5
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
Cleaning (ultrasonic cleaning)
1. Capacitance Change of Capacitors
28
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
(1) In case of SL char.
(2) In case of B/E/F char.
Safety Certified Ceramic Capacitors Notice
Capacitance might change a little depending on a
surrounding temperature or an applied voltage.
Please contact us if you use for the strict
constant time circuit.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
change greatly depending on the surrounding
temperature or an applied voltage. So, it is not
likely to be suitable for use in a constant time
circuit.
Please contact us if you need detailed information.
Notice (Soldering and Mounting)
Notice (Rating)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2. Performance Check by Equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 (B/E/F char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance. So, the capacitance value may change
depending on the operating condition in the
equipment. Therefore, be sure to confirm the
apparatus performance of receiving influence in
the capacitance value change of a capacitor,
such as leakage current and noise suppression
characteristic.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.
C85E.pdf
08.10.29