C4532X5R0J107M TDK Corporation, C4532X5R0J107M Datasheet - Page 58

• Manufacturer Part Number: C4532X5R0J107M
• Description: CAP CER 100UF 6.3V X5R 20% 1812
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C4532X5R0J107M

• Capacitance: 100µF
• Package / Case: 1812 (4532 Metric)
• Voltage - Rated: 6.3V
• Tolerance: ±20%
• Temperature Coefficient: X5R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 85°C
• Features: Low ESR
• Applications: General Purpose
• Size / Dimension: 0.177" L x 0.126" W (4.50mm x 3.20mm)
• Thickness: 2.80mm
• Tolerance (+ Or -): 20%
• Voltage: 6.3VDC
• Temp Coeff (dielectric): X5R
• Operating Temp Range: -55C to 85C
• Mounting Style: Surface Mount
• Construction: SMT Chip
• Case Style: Ceramic Chip
• Failure Rate: Not Required
• Wire Form: Not Required
• Product Length (mm): 4.5mm
• Product Depth (mm): 3.2mm
• Product Height (mm): 2.8mm
• Product Diameter (mm): Not Requiredmm
• Dielectric Characteristic: X5R
• Capacitance Tolerance: ± 20%
• Voltage Rating: 6.3VDC
• Capacitor Case Style: 1812
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 445-1413-2; C4532X5R0J107M; C4532X5R0J107MT; C4532X5R0J107MT

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — General Application // Version A11
No.
17
*As for the initial measurement of capacitors (Class2) on number 8,12,13,14 and 15, leave capacitor at 150 —10, 0°C for 1
hour and measure the value after leaving capacitor for 24±2h in ambient conditions.
General
Specifications
Item
Life
External
appearance
Capacitance
Q
(Class 1)
D.F.
(Class 2)
Insulation
Resistance
Performance
No mechanical damage.
* Inside ( ) is applied to Y5V 6.3V
product.
Characteristics
X5R: 200% of initial spec. max.
X7R: 200% of initial spec. max
Y5V: 150% of initial spec. max
1,000MΩ or 50MΩ•μF min. ,
whichever smaller.
(As for the capacitors of rated voltage
16, 10 and 6.3V DC, 1,000 MΩ or
10MΩ•μF min.,)
Rated
Capacitance
C ≥ 30pF
10pF ≤ C < 30pF
C < 10pF
Characteristics
Class 1
Class 2
C0G
X5R
X7R
Y5V
C : Rated capacitance (pF)
Change from the
value before test
±3% or ±0.3pF,
whichever larger.
± 25 %
± 25 %
± 30 %
Q
350 min.
275+5/2×C min.
200+10×C min.
*(± 40 %)
C Series — General Application
Test or Inspection Method
Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply voltage at 125±2ºC for 1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2) Voltage treat the
capacitor under testing temperature and voltage for 1
hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.