C1812C224J5GACTU Kemet, C1812C224J5GACTU Datasheet - Page 2

• Manufacturer Part Number: C1812C224J5GACTU
• Description: CAP CER .22UF 50V C0G 1812
• Manufacturer: Kemet
• Series: HiCVr

Specifications of C1812C224J5GACTU

• Capacitance: 0.22µF
• Voltage - Rated: 50V
• Tolerance: ±5%
• Temperature Coefficient: C0G, NP0
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Applications: General Purpose
• Package / Case: 1812 (4532 Metric)
• Size / Dimension: 0.177" L x 0.126" W (4.50mm x 3.20mm)
• Thickness: 1.60mm
• Capacitor Application: High CV
• Dielectric Characteristic: C0G / NP0
• Capacitance Tolerance: ± 5%
• Voltage Rating: 50VDC
• Capacitor Case Style: 1812
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Ratings: -
• Lead Spacing: -
• Other names: 399-5361-2; C1812C224J5GAC; C1812C224J5GAC7800

In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
As detailed in the KEMET Surface Mount Catalog F3102 for C0G, with following specific requirements based on room
temperature (25°C) parameters:
•
•
•
Components are suitable for IR reflow soldering only . All parts incorporate the standard KEMET barrier layer
of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leach-
ing. (Please refer to KEMET catalog F3102 for additional soldering information and recommendations.)
These chips will be supplied unmarked. However, marking is available as an extra cost option.
Qualification/Certification
AEC-Q200 Rev. C - Automotive
Electrical Parameters
Soldering Process
Marking
Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 30 PPM/°C over that range.
Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000 megohm microfarads or
100GΩ, whichever is less.
Capacitance and Dissipation Factor (DF) measured at the following conditions.
Capacitance - 1 kHz and 1 vrms if capacitance >1000 pF
DF Limit is 0.1%.
The information in this bulletin supplements that in the catalog.
1 MHz and 1 vrms if capacitance ≤ 1000 pF
RoHS 6/6 - 100% tin termination