C1210H104J5GACTU Kemet, C1210H104J5GACTU Datasheet - Page 12

• Manufacturer Part Number: C1210H104J5GACTU
• Description: CAP CER .1UF 50V C0G 1210 HT
• Manufacturer: Kemet
• Series: C1210r

Specifications of C1210H104J5GACTU

• Capacitance: 0.1µF
• Voltage - Rated: 50V
• Tolerance: ±5%
• Temperature Coefficient: C0G, NP0
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 200°C
• Features: High Temperature
• Applications: General Purpose
• Package / Case: 1210 (3225 Metric)
• Size / Dimension: 0.138" L x 0.102" W (3.50mm x 2.60mm)
• Thickness: 1.25mm
• Dielectric Characteristic: C0G / NP0
• Capacitance Tolerance: ± 5%
• Voltage Rating: 50VDC
• Capacitor Case Style: 1210
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• Operating Temperature Range: - 55 C to + 200 C
• Temperature Coefficient / Code: C0G (NP0)
• Product: High Temperature MLCCs
• Dimensions: 2.5 mm W x 3.2 mm L x 1.25 mm H
• Dissipation Factor Df: 0.1
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 399-5749-2; C1210H104J5GAC; C1210H104J5GAC7800

Surface Mount Multilayer Ceramic Chip Capacitors – High Temperature 200°C, C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 3 – Maximum Component Rotation
Figure 4 – Maximum Lateral Movement
Figure 5 – Bending Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
8mm & 12mm Tape
Bo
Embossed
Carrier
12mm & 16mm
Tape Width
Ao
8mm
R
T
°
0.5 mm maximum
0.5 mm maximum
Bending
Radius
Maximum Component Rotation
8,12
Tape
Width (mm)
16-200
Typical Component Centerline
Typical Pocket Centerline
Punched
Carrier
0.1 Newton to 1.0 Newton (10g to 100g)
0.1 Newton to 1.3 Newton (10g to 130g)
Top View
R
16mm Tape
Maximum
Peel Strength
Rotation (
20
10
1.0 mm maximum
1.0 mm maximum
T
°
)
s
°
Maximum Component Rotation
8,12
72-200
Tape
Width (mm)
16-56
Side View
Maximum
Rotation (
10
20
5
S
°
C1001-1 • 9/14/2010
)
12