C1206X103K2RACTU Kemet, C1206X103K2RACTU Datasheet - Page 3
![CAP CER 10000PF 200V X7R 1206](/photos/10/53/105350/1206_kemet_mlcc_caps_sml.jpg)
C1206X103K2RACTU
Manufacturer Part Number
C1206X103K2RACTU
Description
CAP CER 10000PF 200V X7R 1206
Manufacturer
Kemet
Series
FT-CAPr
Specifications of C1206X103K2RACTU
Capacitance
10000pF
Voltage - Rated
200V
Tolerance
±10%
Temperature Coefficient
X7R
Mounting Type
Surface Mount, MLCC
Operating Temperature
-55°C ~ 125°C
Features
Soft Termination
Applications
Boardflex Sensitive
Package / Case
1206 (3216 Metric)
Size / Dimension
0.126" L x 0.063" W (3.20mm x 1.60mm)
Thickness
0.78mm
Case Size
1206
Dielectric Characteristic
X7R
Material, Element
Ceramic
Special Features
Flexible Terminations
Termination
SMT
Voltage, Rating
200 VDC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Ratings
-
Lead Spacing
-
Lead Free Status / Rohs Status
RoHS Compliant part
Other names
C1206X103K2RAC
C1206X103K2RAC7800
C1206X103K2RAC7800
As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements
based on room temperature (25°C) parameters:
•
•
•
•
All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to pro-
vide excellent solderability as well as resistance to leaching. The recommended techniques are as follows:
These chips will be supplied unmarked. If required, they can be laser-marked as an extra option.
Details on the marking format are included in KEMET Surface Mount catalog F3102.
AEC-Q200 Rev. C - Automotive
RoHS 6 - 100% tin termination
In general, the information in the KEMET Surface Mount catalog F3102 applies to these
capacitors. The information in this bulletin supplements that in the catalog.
Electrical Parameters
Soldering Process
Marking
Qualification/Certification
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
•
•
Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range.
Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 500
megohm microfarads or 100,000 MΩ, whichever of the two is smaller.
Capacitance and Dissipation Factor (DF) measured under the following conditions:
1kHz and 1 Vrms if capacitance ≤ 10μF
120Hz and 0.5 Vrms if capacitance > 10μF
DF Limits are:
1210 case size - Solder Reflow
0603/0805/1206 case sizes – Solder Wave/Solder Reflow
50 - 200 Volts
16 - 25 Volts
6.3/10 Volts
2.5%
3.5%
5.0%