cat24c128 Catalyst Semiconductor, cat24c128 Datasheet
cat24c128
Available stocks
Related parts for cat24c128
cat24c128 Summary of contents
Page 1
... Catalyst Semiconductor, Inc. Characteristics subject to change without notice DEVICE DESCRIPTION 2 C Protocol The CAT24C128 is a 128-Kb Serial CMOS EEPROM, internally organized as 16,384 words of 8 bits each. It features a 64-byte page write buffer and supports both the Standard (100 kHz) as well as Fast (400 kHz protocol ...
Page 2
... CAT24C128 (1) ABSOLUTE MAXIMUM RATINGS Storage Temperature Voltage on Any Pin with Respect to Ground RELIABILITY CHARACTERISTICS Symbol Parameter (4) N Endurance END T Data Retention DR D.C. OPERATING CHARACTERISTICS -40°C to +125°C, unless otherwise specified Symbol Parameter Test Conditions I Read Current Read, f ...
Page 3
... Catalyst Semiconductor, Inc. Characteristics subject to change without notice Standard Min 4 4.7 4 4.7 0 250 4 4.7 100 0 2 ≥ 2.5 V CAT24C128 Fast Max Min Max Units 100 400 kHz 0.6 1.3 0.6 0.6 0 100 1000 300 300 300 0.6 1.3 3.5 0.9 100 100 100 0 2.5 ...
Page 4
... Data flow is controlled by a Master device, which generates the serial clock and all START and STOP conditions. The CAT24C128 acts as a Slave device. Master and Slave alternate as either transmitter or receiver devices may be ...
Page 5
... Catalyst Semiconductor, Inc. Characteristics subject to change without notice DEVICE ADDRESS ACK DELAY (≤ HIGH LOW t LOW t HD:DAT t SU:DAT CAT24C128 STOP CONDITION R/W BUS RELEASE DELAY (RECEIVER) 9 ACK SETUP (≥ t SU:DAT ) t SU:STO t BUF Doc No. MD-1103, Rev. J ...
Page 6
... WRITE OPERATIONS Byte Write Upon receiving a Slave address with the R/W bit set to ‘0’, the CAT24C128 will interpret the next two bytes as address bytes These bytes are used to initialize the internal address counter; the 2 most significant bits are ‘don’t care’, the next 8 point to one of 256 available pages and the last 6 point to a location within a 64 byte page ...
Page 7
... WR STOP CONDITION ADDRESS ADDRESS DATA BYTE BYTE BYTE a 13 – – ADDRESS BYTE SU:WP t HD:WP 7 CAT24C128 S T DATA O BYTE START ADDRESS CONDITION DATA DATA BYTE BYTE n+1 n ...
Page 8
... READ OPERATIONS Immediate Read Upon receiving a Slave address with the R/W bit set to ‘1’, the CAT24C128 will interpret this as a request for data residing at the current byte address in memory. The CAT24C128 will acknowledge the Slave address, will immediately shift out the data residing at the current address, and will then wait for the Master to respond ...
Page 9
... A BYTE BYTE – – DATA DATA DATA C C BYTE BYTE BYTE n+1 n+2 9 CAT24C128 STOP SLAVE C O ADDRESS DATA C BYTE ...
Page 10
... CAT24C128 PACKAGE OUTLINE DRAWING PDIP 8-Lead 300mils (L) PDIP 8-Lead 300mils (L) PIN # 1 IDENTIFICATION D TOP VIEW SIDE VIEW Notes: (1) All dimensions are in millimeters. (2) Complies with JEDEC MS-001. For current Tape and Reel information, download the PDF file from: http://www.catsemi.com/documents/tapeandreel.pdf. Notes: 1. All dimensions are in millimeters. ...
Page 11
... Notes: 1. All dimensions are in millimeters. 2. Complies with JEDEC MS-012. © Catalyst Semiconductor, Inc. Characteristics subject to change without notice SYMBOL θ θ CAT24C128 PACKAGE INFORMATION MIN NOM MAX 1.35 1.75 0.10 0.25 0.33 0.51 0.19 0.25 4.80 5.00 5.80 6.20 3.80 4.00 1.27 BSC 0.25 0.50 0.40 1.27 0º 8º c END VIEW Doc ...
Page 12
... CAT24C128 TSSOP 8-Lead 4.4mm ( TOP VIEW D SIDE VIEW For current Tape and Reel information, download the PDF file from: http://www.catsemi.com/documents/tapeandreel.pdf. Notes: 1. All dimensions are in millimeters. Angles in degrees. 2. Complies with JEDEC MO-153. Doc. No. MD-1103, Rev. J SYMBOL MIN A A1 0.05 A2 0.80 b 0.19 c 0.09 D 2.90 E1 ...
Page 13
... Complies with JEDEC MO-229. © Catalyst Semiconductor, Inc. Characteristics subject to change without notice SIDE VIEW MAX 0.55 0.05 0.30 2.10 1.70 3.10 A 0.30 A1 0.40 13 CAT24C128 PACKAGE OUTLINE DRAWING DETAIL A DAP SIZE 1.3 x 1.8 PIN #1 IDENTIFICATION D2 BOTTOM VIEW DETAIL A A3 FRONT VIEW Doc. No. UDFN8-032-02 08/29/07 Doc No. MD-1103, Rev. J ...
Page 14
... CAT24C128 MSOP 8-Lead 3.0 x 3.0mm (Z) MSOP 8-Lead 3.0 x 3.0mm ( TOP VIEW SIDE VIEW Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MO-187. For current Tape and Reel information, download the PDF file from: http://www.catsemi.com/documents/tapeandreel.pdf. Notes: 1. All dimensions are in millimeters. Angles in degrees. ...
Page 15
... All packages are RoHS-compliant (Lead-free, Halogen-free). (2) The standard lead finish is NiPdAu. (3) The device used in the above example is a CAT24C128YI-GT3 (TSSOP, Industrial Temperature, NiPdAu, Tape & Reel). (4) For additional package and temperature options, please contact your nearest Catalyst Semiconductor Sales office. © Catalyst Semiconductor, Inc. ...
Page 16
... CAT24C128 REVISION HISTORY Date Revision Comments 10/07/05 A Initial Issue 11/16/05 B Update Ordering Information Add Tape and Reel Specifications 02/02/06 C Update A.C. Characteristics Update Ordering Information 03/13/06 D Update A.C. Characteristics 04/26/06 E Update Features Update Device Description Update Pin Configuration Update A.C. Characteristics Update Hardware Write Protecttion Add Figure 6a ...
Page 17
... Information” or “Preliminary” and other products described herein may not be in production or offered for sale. Catalyst Semiconductor advises customers to obtain the current version of the relevant product information before placing orders. Circuit diagrams illustrate typical semiconductor applications and may not be complete. © Catalyst Semiconductor, Inc. Characteristics subject to change without notice 17 CAT24C128 Doc No. MD-1103, Rev. J ...
Page 18
... Catalyst Semiconductor, Inc. Corporate Headquarters 2975 Stender Way Santa Clara, CA 95054 Phone: 408.542.1000 Fax: 408.542.1200 www.catsemi.com Publication #: MD-1103 Revison: J Issue date: 09/18/07 ...