T140D686K035AS Kemet, T140D686K035AS Datasheet - Page 2

• Manufacturer Part Number: T140D686K035AS
• Description: CAPACITOR TANT 68UF 35V 10% AXIA
• Manufacturer: Kemet
• Series: T140r
• Type: Hermetically Sealedr

Specifications of T140D686K035AS

• Capacitance: 68µF
• Voltage - Rated: 35V
• Tolerance: ±10%
• Esr (equivalent Series Resistance): 600.0 mOhm
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: Axial
• Size / Dimension: 0.351" Dia x 0.786" L (8.92mm x 19.96mm)
• Manufacturer Size Code: D
• Features: Wet Tantalum
• Voltage Rating: 35 Volts
• Esr: 0.6 Ohms
• Termination Style: Axial
• Operating Temperature Range: - 55 C to + 125 C
• Dimensions: 0.351 in Dia. x 0.786 in L
• Product: Tantalum Solid Hermetically Sealed
• Leakage Current: 12 uA
• Height: -
• Lead Spacing: -
• Lead Free Status / Rohs Status: No
• Other names: Q2769146

*Not approved to ‘D’ Failure Rate Level on all voltages and
capacitance values.
**MIL-PRF-39003/10 for space applications.
• CAPACITANCE/VOLTAGE RANGE:
• CAPACITANCE TOLERANCE: Available in stan-
• DISSIPATION FACTOR: Maximum DF limits are
• DC LEAKAGE CURRENT: Each corresponding
• RATED
• IMPEDANCE and ESR: See Application Notes
CSR09
CSR13* Polar-Standard MIL Case
CSS13** Polar-Standard MIL Case
CSR21
CSR23* Polar-Extended Range
.0023-1200µF, 6-125 Volts.
dard EIA values with ±20%, ±10% and ±5% toler-
ances.
shown in corresponding series part number list-
ings on pages 7-41. See Application Notes
Section, page 76 for additional description.
part number table lists maximum leakage current
for each capacitor on pages 7-41. See Application
Notes Section, page 76 for additional description.
SURGE VOLTAGE; REVERSE VOLTAGE: See
Application Notes Section, Pages 76 & 77 for
description.
Section, pages 77 & 78 for description. Reference
ESR values are shown for commercial hermetical-
ly sealed capacitors on page 19.
Polar-Subminiature
Polar-Standard Low ESR
MIL Case
VOLTAGE;
WORKING
T222
T212
T216
T262
T242
D (0.001%/k hrs.)
D (0.001%/k hrs.)
C (0.01%/k hrs.)
D (0.001%/k hrs.)
D (0.001%/k hrs.)
VOLTAGE;
*Not approved to ‘D’ Failure Rate Level on all voltages and
capacitance values.
**MIL-PRF-39003/10 for space applications.
CSR33* Polar-Extended Range
CSS33** Polar-Extended Range
CSR91* Non-Polar
• AC RIPPLE VOLTAGE: Permissible AC ripple volt-
• ENVIRONMENTAL CONSIDERATIONS:
For additional Environmental Test Information see
pages 80, 81 and 82.
• LEAD MATERIAL: Standard leads are solder-coat-
• INSULATING SLEEVES: The standard insulating
• LEAD TAPE and REEL: Reeling per specification
age is related to the ESR of the capacitor and the
power dissipation capabilities of a particular case
size. Thermal capacities for the various case sizes
have been determined empirically and are listed
below. For additional description see page 78.
A. Shock Test: MIL-STD-202, Method 213
B. Thermal Shock, MIL-STD-202,
C. Moisture Resistance: MIL-STD-202,
D. Solderability: MIL-STD-202, Method 208
ed nickel per MIL-STD-1276.
material used in transparent high temperature
plastic, having 2000 volt dielectric strength, excel-
lent dimensional stability and chemical and cold
flow resistance.
RS-296. See pages 71 and 73 for additional infor-
mation.
Method 107, Condition B.
Method 106.
Low Leakage
Low Leakage
A
B
C
D
.09
.100
.125
.180
T252
T256
T213
D (0.001%/k hrs.)
C (0.01%/k hrs.)
D (0.001%/k hrs.)
.070
.090
—
—
5