TRIMMER CAP SMD 4.5 TO 30PF

CTZ3E-30C-W1-PF

Manufacturer Part NumberCTZ3E-30C-W1-PF
DescriptionTRIMMER CAP SMD 4.5 TO 30PF
ManufacturerAVX Corporation
SeriesCTZ, Kyocera
CTZ3E-30C-W1-PF datasheets
 


Specifications of CTZ3E-30C-W1-PF

Adjustment TypeTop AdjustmentCapacitance Range4.5 ~ 30pF
Voltage - Rated25VSize / DimensionRectangular - 0.177" L x 0.126" W (4.50mm x 3.20mm)
Height0.071" (1.80mm)Mounting TypeSurface Mount
FeaturesLow ProfilePackage / Case0.177" L x 0.126" W x 0.071" H (4.50mm x 3.20mm x 1.80mm)
Capacitance Tolerance+100, -0%Voltage Rating25VDC
Capacitor Dielectric TypeCeramicNo. Of Pins2
Capacitor MountingSMDTemperature Coefficient± 500ppm/°C
Termination TypeSMDRohs CompliantYes
Lead Free Status / RoHS StatusLead free / RoHS Compliant  
1
Page 1
2
Page 2
3
Page 3
Page 3/3

Download datasheet (140Kb)Embed
Prev
Trimmer Capacitors
PCB Mounting
• When our recommended landpattern is not used, please check
mounting alignment.
• When mounting on PCB, please do not apply pressure to trimmer
capacitors over 500g.f.
Soldering
• When using soldering iron, adjust iron tip to 280 ° C max.
• Please find below recommended solder profile.
300
・Peak: 250 C Over 10 sec. max.
250
・220°C Over 60 sec. max.
200
150
100
・Preheat: 160
190 C 120 sec.
50
0
0
50
100
150
Time [Sec.]
Storage Conditions
1) Do not store components in corrosive condition such as chloric or
sulfuric environment.
2) Components before use should be stored under the condition with
temperature of 5 to 40 degrees Celsius and humidity of 20 to 70%
RH.
3) It is recommended to use components within 6 months of incoming.
4) Do not open the minimal package until right before the use.
5) Do not store components under direct sunlight or dewy
environment.
Screwdrivers
Please use proper screwdriver for adjustment of the capacitor.
Kyocera can supply suitable ceramic type screwdrivers specially
designed for the use of CTZ series. Please contact your local AVX
office for the details.
CTZ3
Pin Head
⊕ : CTZ3 Phillips-head (Plus) Ceramic Screwdriver
CTZ2
Pin Head
⊕ : CTZ2 Phillips-head (Plus) Ceramic Screwdriver
200
250
(CTZ3 Phillips-head (Plus))
(CTZ2 Phillips-head (Plus))
110
125
(CTZ3 Phillips-head (Plus) Screwdriver)
96
110
(CTZ2 Phillips-head (Plus) Screwdriver)
Driver Head Type
(3.60)
1.2
0.35
0.85
(2.0)
0.19