TP15900-4W Cooper/Bussmann, TP15900-4W Datasheet - Page 2

• Manufacturer Part Number: TP15900-4W
• Description: SWITCH FUSED DISCONNECT 4 POS UL
• Manufacturer: Cooper/Bussmann
• Series: Telpower®r
• Type: Switchr

Specifications of TP15900-4W

• Voltage: 80V
• Current: 50A
• Mounting Type: Chassis Mount
• Current Rating: 50A
• Termination Style: Screw Terminal
• Number Of Circuits: 4
• Fuse Size: TPA
• Product Type: Accessories
• Number Of Poles: 4 Poles
• Mounting Style: Panel
• Product: Accessories
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

M6 x 1 MOUNTING BOLTS
ARE NOT TO EXTEND
BEYOND THIS POINT
Load Wire Attachment Procedure:
For TP15900-4W, TP15900-41W, 15900-4WLT, and 15900-41WLT
1. Mount the 4-pole disconnect module firmly to bus bar using a M6 x 1 bolt at each end of the line contact.
2. Insert 1/32” thick x 7/32” wide slotted screwdriver at a slight angle in the square hole at the rear of the module
3. Strip wire 1/2” and insert into the round hole of the load terminal corresponding to the screwdriver location.
4. Remove screwdriver.
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or
construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin.
Once a product has been selected, it should be tested by the user in all possible applications.
5-02-01
Fused Disconnect Switch
(Recommended torque 72 in-lb)
until it seats. Approximately 3/4” (19.0mm) into the block.
WARNING: DO NOT TWIST THE SCREWDRIVER WHILE INSERTED IN THE SQUARE HOLE. DAMAGE
MAY RESULT TO THE WIRE RETAINING SPRING.
Wire range: #8 through #24 AWG.
SB99155
(0.50)
12.7
PUSH SCREWDRIVER
IN AT SLIGHT ANGLE
M6 x 1 MOUNTING
BOLT
(0.50)
12.7 STRIP LENGTH
#8 THROUGH #24
AWG WIRE
BUS BAR
TP15900-4W
4-POLE DISCONNECT MODULE
Bussmann
Form No. TP15900-4W
SCREWDRIVER PORTS
WIRE PORTS
BIF Doc #5019
LINE CONTACT
Page 2 of 2
®