MS3102E20-4P Amphenol Industrial Operations, MS3102E20-4P Datasheet - Page 11

• Manufacturer Part Number: MS3102E20-4P
• Description: CONN RCPT 4POS BOX MNT W/PINS
• Manufacturer: Amphenol Industrial Operations
• Series: MIL-5015 Derivativer
• Type: Panel Socketr

Specifications of MS3102E20-4P

• Connector Type: Receptacle, Male Pins
• Mounting Type: Panel Mount, Flange
• Number Of Positions: 4
• Termination: Solder Cup
• Orientation: N (Normal)
• Fastening Type: Threaded
• Shell Material, Finish: Aluminum, Olive Drab Cadmium Plated
• Shell Size - Insert: 20-4
• Ingress Protection: Environment Resistant
• Connector Body Material: Aluminum Alloy
• Gender: Receptacle
• Contact Gender: Pin
• Connector Mounting: Box
• Connector Shell Size: 20
• Angle: Straight
• Application: True MIL
• Brand/series: MS Series
• Class: E
• Contact Configuration: 4#12
• Contact Plating: Silver
• Contact Type: Pin
• Current, Rating: 23 A
• Diameter, Mounting Hole: 0.12 "
• Finish, Housing: Olive Drab Cadmium
• Housing Type: Metal
• Insert Arrangement: 20-4
• Material, Dielectric: Neoprene
• Material, Housing: Aluminum Alloy
• Mating Type: Threaded
• Mount Method: Front
• Number Of Contacts: 4
• Primary Type: 5015 MIL Spec
• Shell Size: 20
• Special Features: Environmental Resistant, Single Key/Keyway Shell Polarization
• Voltage, Rating: 900/1250 VAC/VDC
• Wire, Awg: 12
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Shell Size, Military: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Contains lead / RoHS non-compliant

MS/Standard
MS-E/F
wall mounting receptacle
cable connecting plug
box mounting receptacle
straight plug
90 degree plug
10
MS-E & F
MS Class F connectors satisfy all the performance
requirements of MIL-DTL-5015. Class E, environmental
is also produced, but is no longer listed on the qualified
products listing (QPL). These connectors are recom-
mended for conditions where vibration, moisture, pres-
sure and/or temperature are extreme. Strain relief is
supplied on most shell sizes.
Shells:
Shell components are fabricated from high grade alumi-
num alloy. The standard hardware plating is electrically
conductive cadmium plated finish with an olive drab chro-
mate after-treatment for corrosion resistance. Consult
Amphenol, Sidney, NY for other plating options.
Contacts:
Contacts are silver plated copper alloy for maximum cor-
rosion resistance, maximum current carrying capacity
and low millivolt drop. Size 16 and 12 socket contacts
incorporate a closed entry design. Crimp and solder ver-
sions are available. Refer to pages 49, 67 and 68 for
additional contact information.
Inserts:
Resilient neoprene inserts provide an outstanding mois-
ture barrier, high dielectric strength, and resistance to
vibration. Either pin or socket insert can be pressurized.
Strain Relief Clamp:
Strain relief clamps minimize tension at the solder well
connection and provide a positive mechanical moisture
seal. Complete field serviceability is possible with the
strain relief clamp.