D38999/26MB35SN Souriau Connection Technology, D38999/26MB35SN Datasheet - Page 72

• Manufacturer Part Number: D38999/26MB35SN
• Description: CONN PLUG 13POS STRAIGHT W/SCKT
• Manufacturer: Souriau Connection Technology
• Series: Military, MIL-DTL-38999 Series IIIr

Specifications of D38999/26MB35SN

• Connector Type: Plug, Female Sockets
• Number Of Positions: 13
• Shell Size - Insert: 11-35
• Shell Size, Military: B
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Fastening Type: Threaded
• Orientation: N (Normal)
• Shell Material, Finish: Composite, Nickel Plated
• Features: Shielded
• Connector Body Material: Aluminum Alloy
• Gender: Plug
• Contact Gender: Socket
• Connector Mounting: Cable
• Lead Free Status / RoHS Status: Lead free / RoHS non-compliant
• Ingress Protection: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS non-compliant
• Other names: SD38999/26MB35SN

Common Section
Wiring instruction
Cable preparation and wire stripping
Insertion of wire in contact barrel
When inserting the stripped wire into the contact barrel check that no
strands are left outside and that the wire is visible through the wire
inspection hole in the barrel.
Important :
- Slide any accessories over wire strands before carrying out the following operations.
- Contacts are inserted and extracted from the rear of the connector.
Insertion of the contacts
1 - Engage the crimp cable / contact asembly into the longitudinal slot of the
plastic tool (coloured tip).
Slide the tool down the cable until the tip of the tool abuts the contact
retention shoulder.
2 - Introduce the contact into the required contact cavity in the insulator, pushing
tool axialy, until the contact snaps into position in clip.
3 - Withdraw the tool (from rear). Check that contact is firmly locked by
pulling wire gently.
When connector is fully loaded, check the position of contact tips. They should
all be in the same plane.
Nota : For larger sizes of cable which are stiff enough manual insertion without
tool is preferable.
Contact
L max
L min
size
#22D
3.58
3.99
.16
.1 4
5.31
5.82
#20
.21
.23
5.82
5.31
#1 6
.21
.23
5.31
5.82
#1 2
.21
.23
1 2.5
#8
.49
1 3
.51
1 2.5
#4
.49
1 3
.51
72
1
2
3
Conductor insulation
L = length of wire stripping
Wire
0.5 to 0.8 mm
L
Inspection hole
Barrel