DF1E-4P-2.5DS Hirose Electric Co Ltd, DF1E-4P-2.5DS Datasheet - Page 16

• Manufacturer Part Number: DF1E-4P-2.5DS
• Description: CONN HEADER 4POS 2.5MM R/A TIN
• Manufacturer: Hirose Electric Co Ltd
• Series: DF1Er

Specifications of DF1E-4P-2.5DS

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 4
• Number Of Positions Loaded: All
• Pitch: 0.098" (2.50mm)
• Number Of Rows: 1
• Contact Mating Length: 0.177" (4.50mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Finish: Tin
• Color: Beige
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Contact Finish Thickness: -
• Row Spacing: -
• Fastening Type: -
• Other names: *DF1E-4P-2.5DS; H3579

BPrecautions
1. Recommended Soldering Condition
2. Cleaning Condition
3. Connection Condition
4. Cautions
5. Precautions
● In some method for laying the cable within equipment, a tension may be applied to the
● Incomplete insertion of the contact can be prevented by mounting a retainer; however,
● If the potting process is implemented, it is desirable to fill the connector with resin,
● The color phase of this product may be slightly different from that of the forming product
Flow: 260ç for 10 seconds
Refer to Nylon Connector Use Hand book.
Refer to Nylon Connector Use Hand book.
● To remove the connector, if the connector is forcedly removed, it will cause connector
Refer to Nylon Connector Use Hand book.
Manual soldering: 300ç for 3 seconds
However, if the connector is cleaned by the potting header, the detergent remains within the
connector, which will cause malfunction.
cable so as to remove the contact. In this case, it is recommended to use the retainer.
mounting of a retainer might not be possible when the contact protrudes beyond the
socket. Insert the contact securely and then mount the retainer.
considering the resin surface tensile force.
according to the manufacturing lot and future storage conditions, however the difference
doesn't affect the performance.
damage. If the connector is hardly removed, slightly push the connector once, and then
remove it using the lock.
DF1E Series●2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
B161