NR10050T220M Taiyo Yuden, NR10050T220M Datasheet - Page 9

• Manufacturer Part Number: NR10050T220M
• Description: INDUCTOR 22UH 2.6A 20% SMD
• Manufacturer: Taiyo Yuden
• Series: NRr

Specifications of NR10050T220M

• Inductance: 22µH
• Current: 2.6A
• Current - Saturation: 2.6A
• Current - Temperature Rise: 2.5A
• Tolerance: ±20%
• Shielding: Shielded
• Dc Resistance (dcr): 58.5 mOhm Max
• Self Resonant Freq: 10MHz
• Package / Case: 0.394" L x 0.386" W x 0.197" H (10.00mm x 9.80mm x 5.00mm)
• Mounting Type: Surface Mount
• Operating Temperature: -25°C ~ 105°C
• Frequency - Test: 100kHz
• Applications: Power Supplies
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Q @ Freq: -
• Other names: 587-1699-2

△
18.Loading under damp
19.Low temperature life test
20.High temperature life
21.Loading at high
22.Standard condition
！
RELIABILITY DATA
当社カタログをご使用の際には 「当社製品に関するお断り」 を必ずお読みください。
heat
test
temperature life test
Item
Inductance change：Within±10％
No significant abnormality in appearance.
BRC1608, BRL2012, BRC2016,
Inductance change：Within±10％
No significant abnormality in appearance.
Inductance change：
Within±10％
No significant abnormality in
appearance.
Standard test condition ： Unless otherwise specified, temperature is 20±15％ and 65±20％of
relative humidity.
When there are question concerning measurement result : In order to provide correlation date, the
test shall be condition of 20±2℃ of temperature, 65±5% relative humidity.
Inductance is in accordance with our measured value.
BRL2518, BRL3225
Type
Inductance change：
Within±10％
No significant abnormality in
appearance.
NRH24, NR30/40/60/80,
Specifled Value
NRG40 Type
Inductance change：
Within±10％
No significant abnormality in
appearance.
NR10050 Type
△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
Recovery ： At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
NRH24, NR30/40/60/80, NRG40Type, NR10050 Type：
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type：
Recovery ： At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
NRH24, NR30/40/60/80, NRG40Type, NR10050 Type：
Recovery ： At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
NR10050 Type：
Recovery ： At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
NRH24, NR30/40/60/80, NRG40Type：
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type：
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type：
The test samples shall be soldered to the test board
by the reflow.
The test samples shall be placed in thermostatic oven
set at specified temperature and humidity and applied
the rated current continuously as shown in below
table.
The test samples shall be soldered to the test board
by the reflow.
After that, the test samples shall be placed at test
conditions as shown in below table.
The test samples shall be soldered to the test board
by the reflow soldering
Applied current
Applied current
Applied current
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Humidity
Humidity
Duration
Duration
Time
Time
Time
Time
Time
Test Method and Remarks
Rated current
Rated current
Rated current
500±24hour
500±24hour
500±24hour
90∼95％RH
90∼95％RH
500±2hour
1000hours.
ー40±2℃
1000hours
−40±3℃
1000hours
105±3℃
60±2℃
60±2℃
85±2℃
85±2℃
4/4
373
5