LHLZ06TB220K Taiyo Yuden, LHLZ06TB220K Datasheet - Page 26

• Manufacturer Part Number: LHLZ06TB220K
• Description: INDUCTOR 22UH 1.2A RADIAL
• Manufacturer: Taiyo Yuden
• Series: LHr

Specifications of LHLZ06TB220K

• Inductance: 22µH
• Current: 1.2A
• Tolerance: ±10%
• Dc Resistance (dcr): 190 mOhm Max
• Q @ Freq: 20 @ 2.52MHz
• Self Resonant Freq: 9.5MHz
• Package / Case: Radial
• Mounting Type: Through Hole
• Operating Temperature: -25°C ~ 105°C
• Frequency - Test: 2.52MHz
• Applications: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Current - Saturation: -
• Current - Temperature Rise: -

LA Type，LH Type，FB Type，FL Type
PRECAUTIONS
1.Circuit Design
2.PCB Design
3.Considerations for
4.Soldering
5.Cleaning
6.Handling
7.Storage conditions
automatic placement
Stages
Operating environment,
1.The products described in this specification are intended for
Design
1.Please design insertion pitches of a base in the pitches that
Adjustment of mounting machine
1.Excessive impact load should not be imposed on the
2.Mounting and soldering conditions should be checked
Wave soldering
1.Please refer to the specifications in the catalog for a wave
2.Do not immerse the entire Inductors in the flux during the
Lead free soldering
1.When using products with lead free soldering, we request to
Recommended conditions for using a soldering iron:
Cleaning conditions
1.LA type, LH type
Please do not do cleaning by a supersonic wave.
Handling
1.Keep the inductors away from all magnets and magnetic
Mechanical considerations
1.Please do not give the inductors any excessive mechanical
2.LH type
If inductors are dropped onto the floor or a hard surface they
should not be used.
Packing
1.Please do not give the inductors any excessive mechanical
In loading, please pay attention to handling indication
mentioned in a packing box (a loading direction / number of
maximum loading / fragile item).
Storage
Storage
1.To maintain the solderability of terminal electrodes and to
・Recommended conditions
The ambient temperature must be kept below 30℃. Even
under ideal storage conditions, solderability of products
electrodes may decrease as time passes. For this reason,
inductors should be used within one year from the time of
delivery.
In case of storage over 6 months, solderability shall be
checked before actual usage.
Ambient temperature 0∼40℃
Humidity
use in general electronic equipment,(office supply
equipment,
equipment, and household equipment). They are not
intended for use in mission-critical equipment or systems
requiring special quality and high reliability (traffic systems,
safety equipment, aerospace systems, nuclear control
systems and medical equipment including life-support
systems,) where product failure might result in loss of life,
injury or damage. For such uses, contact TAIYO YUDEN
Sales Department in advance.
fitted a terminal interval.
products when mounting onto the PC boards.
beforehand.
soldering.
soldering operation.
use them after confirming of adhesion, temperature of
resistance to soldering heat, soldering etc sufficiently.
objects.
shocks.
shocks.
keep the packing material in good condition, temperature
and humidity in the storage area should be controlled..
The soldering iron should not directly touch the inductor.
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350 ℃
Duration - 3 seconds or less
telecommunications
Precautions
Below 70 % RH
systems,
measuring
1.When Inductors are mounted onto a PC board, hole dimensions on the board should
1. When installing products, care should be taken not to apply distortion stress as it may
1.If products are used beyond the range of the recommended conditions, heat stresses
LA type, LH type
1.If washing by supersonic waves, supersonic waves may deform products.
1.There is a case that a characteristic varies with magnetic influence.
1.There is a case to be damaged by a mechanical shock.
2.LH type
There is a case to be broken by a fall.
1.There is a case that a lead route turns at by a fall or an excessive shock.
1. Under a high temperature and humidity environment, problems such as reduced
match the lead pitch of the component, if not, it will cause breakage of the terminals or
cracking of terminal roots covered with resin as excess stress travels through the
terminal legs.
deform the products.
may deform the products, and consequently degrade the reliability of the products.
solderability caused by oxidation of terminal electrodes and deterioration
of taping/packaging materials may take place.
Technical considerations
355
5