PIC24HJ32GP202-I/SO Microchip Technology, PIC24HJ32GP202-I/SO Datasheet

IC PIC MCU FLASH 32K 28SOIC

PIC24HJ32GP202-I/SO

Manufacturer Part Number
PIC24HJ32GP202-I/SO
Description
IC PIC MCU FLASH 32K 28SOIC
Manufacturer
Microchip Technology
Series
PIC® 24Hr

Specifications of PIC24HJ32GP202-I/SO

Program Memory Type
FLASH
Program Memory Size
32KB (11K x 24)
Package / Case
28-SOIC (7.5mm Width)
Core Processor
PIC
Core Size
16-Bit
Speed
40 MIPs
Connectivity
I²C, IrDA, LIN, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
21
Ram Size
2K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 10x10b/12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
PIC24HJ
Core
PIC
Data Bus Width
16 bit
Data Ram Size
2 KB
Interface Type
I2C/SPI/UART
Maximum Clock Frequency
40 MHz
Number Of Programmable I/os
21
Number Of Timers
3
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52713-733, 52714-737, 53276-922, EWDSPIC
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
Minimum Operating Temperature
- 40 C
On-chip Adc
10-ch x 12-bit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
AC164339 - MODULE SKT FOR PM3 28SOIC
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
The PIC24HJ32GP202/204 and PIC24HJ16GP304
family devices that you have received conform
functionally to the current Device Data Sheet
(DS70289F), except for the anomalies described in this
document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
Table
The errata described in this document will be addressed
in future revisions of the PIC24HJ32GP202/204 and
PIC24HJ16GP304 silicon.
Data Sheet clarifications and corrections start on
following the discussion of silicon issues.
The silicon revision level can be identified using the
current version of MPLAB
programmers, debuggers and emulation tools, which
are available at the Microchip corporate web site
(www.microchip.com).
TABLE 1:
© 2010 Microchip Technology Inc.
PIC24HJ32GP202
PIC24HJ32GP204
PIC24HJ16GP304
Note 1:
Note:
2.
PIC24HJ32GP202/204 and PIC24HJ16GP304 Family
2:
Table
Part Number
The Device and Revision IDs (DEVID and DEVREV) are located at the last two implemented addresses in
program memory.
Refer to the “dsPIC33F/PIC24H Flash Programming Specification” (DS70152) for detailed information on
Device and Revision IDs for your specific device.
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
Table 2
revision (A6).
1. The silicon issues are summarized in
SILICON DEVREV VALUES
Silicon Errata and Data Sheet Clarification
apply to the current silicon
®
IDE and Microchip’s
Device ID
page
0x0F1D
0x0F1F
0x0F17
PIC24HJ32GP202/204 and
9,
(1)
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 2 or
PICkit™ 3:
1.
2.
3.
4.
The Device and Revision ID values for the various
PIC24HJ32GP202/204 and PIC24HJ16GP304 silicon
revisions are shown in
Note:
Using the appropriate interface, connect the device
to the MPLAB ICD 2 programmer/debugger or
PICkit 3.
From the main menu in MPLAB IDE, select
Configure>Select Device, and then select the
target part number in the dialog box.
Select
(Debugger>Select Tool).
Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
0x3001
PIC24HJ16GP304
A2
Revision ID for Silicon Revision
If you are unable to extract the silicon
revision level, please contact your local
Microchip sales office for assistance.
the
0x3002
A3
MPLAB
Table
0x3004
A4
1.
hardware
0x3005
DS80467E-page 1
A5
(2)
0x3006
A6
tool

Related parts for PIC24HJ32GP202-I/SO

PIC24HJ32GP202-I/SO Summary of contents

Page 1

... Table 1. The silicon issues are summarized in Table 2. The errata described in this document will be addressed in future revisions of the PIC24HJ32GP202/204 and PIC24HJ16GP304 silicon. Note: This document summarizes all silicon errata issues from all revisions of silicon, previous as well as current. Only the issues indicated in the last column of ...

Page 2

... PIC24HJ32GP202/204 and PIC24HJ16GP304 TABLE 2: SILICON ISSUE SUMMARY Item Module Feature Number JTAG Flash 1. Programming UART High-Speed 2. Mode UART Auto-Baud 3. UART Auto-Baud 4. UART Auto-Baud 5. UART IR Mode 6. UART High-Speed 7. Mode SPI SCKx Pins C™ SFR Writes 10-bit 10. Addressing Product Extended 11. Identification Temperature UART Interrupts 12 ...

Page 3

... PIC24HJ32GP202/204 and PIC24HJ16GP304 TABLE 2: SILICON ISSUE SUMMARY (CONTINUED) Item Module Feature Number — 17 10-bit 18. Addressing — 19. CPU 20. EXCH Instruction PGEC3/ Device 21. PGED3 Programming Programming Pins UART Break 22. Character Generation ADC Current 23. Consumption in Sleep Mode All 150ºC 24. Operation Note 1: Only those issues indicated in the last column apply to the current silicon revision. ...

Page 4

... PIC24HJ32GP202/204 and PIC24HJ16GP304 Silicon Errata Issues Note: This document summarizes all silicon errata issues from all revisions of silicon, previous as well as current. Only the issues indicated by the shaded column in the following tables apply to the current silicon revision (A6). 1. Module: JTAG JTAG programming does not work. ...

Page 5

... PIC24HJ32GP202/204 and PIC24HJ16GP304 7. Module: UART When the UART mode (BRGH = 1) and using two Stop bits (STSEL = 1), it may sample the first Stop bit instead of the second one. This issue does not affect the other UART configurations. Work around Use the 16x baud rate option (BRGH = 0) and adjust the baud rate accordingly ...

Page 6

... PIC24HJ32GP202/204 and PIC24HJ16GP304 13. Module: UART When the UART is operating in 8-bit mode (PDSEL = 0x) and using the IrDA encoder/decoder (IREN = 1), the module incorrectly transmits a data payload of 80h as 00h. Work around None. Affected Silicon Revisions 14. Module: Internal Voltage Regulator When the VREGS bit (RCON<8>) is set to a logic ‘ ...

Page 7

... PIC24HJ32GP202/204 and PIC24HJ16GP304 2 19. Module When the I C module is operating in either Master or Slave mode, after the ACKSTAT bit is set when receiving a NACK, it may be cleared by the reception of a Start or Stop bit. Work around Store the value of the ACKSTAT bit immediately after receiving a NACK. ...

Page 8

... PIC24HJ32GP202/204 and PIC24HJ16GP304 23. Module: ADC If the ADC module enabled state when the device enters Sleep mode as a result of executing a PWRSAV #0 instruction, the device power-down current (I ) may exceed the specifications listed PD in the device data sheet. This may happen even if the ADC module is disabled by clearing the ADON bit prior to entering Sleep mode ...

Page 9

... PIC24HJ32GP202/204 and PIC24HJ16GP304 Data Sheet Clarifications The following typographic corrections and clarifications are to be noted for the latest version of the device data sheet (DS70289F): Note: Corrections are shown in bold. Where possible, the original bold text formatting has been removed for clarity. ...

Page 10

... PIC24HJ32GP202/204 and PIC24HJ16GP304 APPENDIX A: REVISION HISTORY Rev A Document (4/2009) Initial release of this document; issued for revision A2, A3, A4 and A5 silicon. Includes silicon issues 1 (JTAG), 2-7 (UART), 8 (SPI C), 11 (Product Identification), 12-13 (UART), 14 (Internal Voltage Regulator), 15 (PSV and 20 (CPU). This document replaces the following errata document: DS80339, “ ...

Page 11

... PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 12

... Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 Taiwan - Kaohsiung Tel: 886-7-213-7830 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2010 Microchip Technology Inc. 08/04/10 ...

Related keywords