DSPIC33FJ64MC802-I/SO Microchip Technology, DSPIC33FJ64MC802-I/SO Datasheet - Page 343

• Manufacturer Part Number: DSPIC33FJ64MC802-I/SO
• Description: IC DSPIC MCU/DSP 64K 28-SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64MC802-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 28-SOIC (7.5mm Width)
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Data Ram Size: 16 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Minimum Operating Temperature: - 40 C
• Package: 28SOIC W
• Device Core: dsPIC
• Family Name: dSPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 6-chx10-bit|6-chx12-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

31.0
This section provides an overview of dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 and dsPIC33FJ128MCX02/
X04 electrical characteristics. Additional information will be provided in future revisions of this document as it becomes
available.
Absolute maximum ratings for the dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 and dsPIC33FJ128MCX02/
X04 family are listed below. Exposure to these maximum rating conditions for extended periods may affect device
reliability. Functional operation of the device at these or any other conditions above the parameters indicated in the
operation listings of this specification is not implied.
Absolute Maximum Ratings
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on V
Voltage on any pin that is not 5V tolerant with respect to V
Voltage on any 5V tolerant pin with respect to V
Voltage on any 5V tolerant pin with respect to Vss when V
Voltage on V
Maximum current out of V
Maximum current into V
Maximum output current sunk by any I/O pin
Maximum output current sourced by any I/O pin
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports
© 2009 Microchip Technology Inc.
Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
2: Maximum allowable current is a function of device maximum power dissipation (see Table 31-2).
3: Exceptions are CLKOUT, which is able to sink/source 25 mA, and the V
4: See the “Pin Diagrams” section for 5V tolerant pins.
ELECTRICAL CHARACTERISTICS
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.
and PGEDx pins, which are able to sink/source 12 mA.
DD
CAP
with respect to V
/V
DDCORE
DD
SS
with respect to V
pin
pin ...........................................................................................................................300 mA
(2)
...........................................................................................................................250 mA
SS
(1)
......................................................................................................... -0.3V to +4.0V
(2)
...............................................................................................................200 mA
SS
(3)
....................................................................................... 2.25V to 2.75V
........................................................................................................4 mA
SS
(3)
...................................................................................................4 mA
when V
Preliminary
SS
DD
DD
(4)
< 3.0V
≥ 3.0V
.................................................... -0.3V to (V
(4)
(4)
......................................... -0.3V to (V
.................................................. -0.3V to +5.6V
REF
+, V
REF
-, SCLx, SDAx, PGECx
DS70291D-page 343
DD
DD
+ 0.3V)
+ 0.3V)