DSPIC33FJ64GP306A-I/PT Microchip Technology, DSPIC33FJ64GP306A-I/PT Datasheet

IC DSPIC MCU/DSP 64K 64-TQFP

DSPIC33FJ64GP306A-I/PT

Manufacturer Part Number
DSPIC33FJ64GP306A-I/PT
Description
IC DSPIC MCU/DSP 64K 64-TQFP
Manufacturer
Microchip Technology
Series
dsPIC™ 33Fr

Specifications of DSPIC33FJ64GP306A-I/PT

Core Processor
dsPIC
Core Size
16-Bit
Speed
40 MIPs
Connectivity
I²C, IrDA, LIN, SPI, UART/USART
Peripherals
AC'97, Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
Number Of I /o
53
Program Memory Size
64KB (64K x 8)
Program Memory Type
FLASH
Ram Size
16K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 18x10b/12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-TFQFP
Core Frequency
40MHz
Core Supply Voltage
3.3V
Embedded Interface Type
I2C, SPI, UART
No. Of I/o's
53
Flash Memory Size
64KB
Supply Voltage Range
3V To 3.6V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
876-1001 - DSPIC33 BREAKOUT BOARD
Eeprom Size
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
DSPIC33FJ64GP306A-I/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
Company:
Part Number:
DSPIC33FJ64GP306A-I/PT
Quantity:
4
The
dsPIC33FJ128GPX06A/X08A/X10A family devices
that you have received conform functionally to the
current Device Data Sheet (DS70593B), except for the
anomalies described in this document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
Table
The errata described in this document will be addressed
in future revisions of the dsPIC33FJ64GPX06A/X08A/
X10A and dsPIC33FJ128GPX06A/X08A/X10A silicon.
Data Sheet clarifications and corrections start on page 8,
following the discussion of silicon issues.
The silicon revision level can be identified using the
current version of MPLAB
programmers, debuggers and emulation tools, which
are available at the Microchip corporate web site
(www.microchip.com).
TABLE 1:
© 2010 Microchip Technology Inc.
dsPIC33FJ64GP206A
dsPIC33FJ64GP306A
dsPIC33FJ64GP310A
dsPIC33FJ64GP706A
dsPIC33FJ64GP708A
dsPIC33FJ64GP710A
dsPIC33FJ128GP206A
dsPIC33FJ128GP306A
dsPIC33FJ128GP310A
Note 1:
dsPIC33FJ64GPX06A/X08A/X10A and dsPIC33FJ128GPX06A/X08A/X10A
Note:
2.
2:
Table
dsPIC33FJ64GPX06A/X08A/X10A
The Device and Revision IDs (DEVID and DEVREV) are located at the last two implemented addresses in
program memory.
Refer to the “dsPIC33F/PIC24H Flash Programming Specification” (DS70152) for detailed information on
Device and Revision IDs for your specific device.
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
Table 2
revision (A4).
Part Number
1. The silicon issues are summarized in
SILICON DEVREV VALUES
Family Silicon Errata and Data Sheet Clarification
apply to the current silicon
®
IDE and Microchip’s
dsPIC33FJ64GPX06A/X08A/X10A and
dsPIC33FJ128GPX06A/X08A/X10A
and
Device ID
0x00CD
0x00CF
0x00C1
0x00D5
0x00D6
0x00D7
0x00D9
0x00E5
0x00E7
(1)
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 2 or
PICkit™ 3:
1.
2.
3.
4.
The Device and Revision ID values for the various
dsPIC33FJ64GPX06A/X08A/X10A
dsPIC33FJ128GPX06A/X08A/X10A silicon revisions
are shown in
Note:
Using the appropriate interface, connect the device
to the MPLAB ICD 2 programmer/debugger or
PICkit 3.
From the main menu in MPLAB IDE, select
Configure>Select Device, and then select the
target part number in the dialog box.
Select
(Debugger>Select Tool).
Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
If you are unable to extract the silicon
revision level, please contact your local
Microchip sales office for assistance.
Table
the
Revision ID for Silicon Revision
1.
0x3009
MPLAB
A3
hardware
DS80465D-page 1
0x300A
A4
tool
and
(2)

Related parts for DSPIC33FJ64GP306A-I/PT

DSPIC33FJ64GP306A-I/PT Summary of contents

Page 1

... MPLAB IDE and Microchip’s programmers, debuggers and emulation tools, which are available at the Microchip corporate web site (www.microchip.com). TABLE 1: SILICON DEVREV VALUES Part Number dsPIC33FJ64GP206A dsPIC33FJ64GP306A dsPIC33FJ64GP310A dsPIC33FJ64GP706A dsPIC33FJ64GP708A dsPIC33FJ64GP710A dsPIC33FJ128GP206A dsPIC33FJ128GP306A dsPIC33FJ128GP310A Note 1: The Device and Revision IDs (DEVID and DEVREV) are located at the last two implemented addresses in program memory ...

Page 2

... PSV page. The EXCH instruction does not execute correctly. Writing to the SPIxBUF register as soon as TBF bit is cleared will cause SPI module to ignore written data. (2) Revision ID for Silicon Revision A3 A4 0x3009 0x300A Affected (1) Revisions devices, the © 2010 Microchip Technology Inc. ...

Page 3

... Operation Note 1: Only those issues indicated in the last column apply to the current silicon revision. © 2010 Microchip Technology Inc. Issue Summary ECAN module may not transmit Buffer 0 data if Buffer 1 data is queued for transmission first. The UART module will not generate back-to-back Break characters ...

Page 4

... Read mode and both of them transmit the data. The resultant data will be the ANDing of the two transmissions. Work around 2 In all I C devices, the addresses as well as bits A10 and A9 should be different. Affected Silicon Revisions devices on the bus, one of © 2010 Microchip Technology Inc. ...

Page 5

... Work around None. Affected Silicon Revisions © 2010 Microchip Technology Inc. 9. Module: SPI In framed SPI mode, when the FRMDLY bit (SPIxCON2<1>) is cleared and the SMP bit (SPIxCON1<9>) is cleared, frame sync pulses do not get generated. Work around None. ...

Page 6

... Work around None. Affected Silicon Revisions 16. Module: I/O While device is being programmed via PGECx/ PGEDx pin pair, device pin with SDO1 functionality may start toggling. Work around None. Affected Silicon Revisions © 2010 Microchip Technology Inc. ...

Page 7

... X EXAMPLE 1: AD1CON1bits.ADON = 0; __asm__ volatile ("REPEAT #50"); __asm__ volatile ("NOP"); Sleep(); © 2010 Microchip Technology Inc. 18. Module: All The affected silicon revisions listed below are not warranted for operation at 150ºC. Work around Only use the affected revisions of silicon for Hi-Temp operating range from -40ºC to +140ºC. ...

Page 8

... T -40°C ≤ T Min Typ Max Units V — 0 — 0.8 SS 0.7 V — 5.5 DD 2.1 — 5.5 ≤ +85°C for Industrial A ≤+125°C for Extended A Conditions V SMBus disabled V SMBus enabled V SMBus disabled V SMBus enabled © 2010 Microchip Technology Inc. ...

Page 9

... Rev C Document (5/2010) Updated silicon issue 12 (CPU). Added silicon issue 17 (ADC) and data sheet clarification 1 (DC Characteristics: I/O Pin Input Specifications). Rev D Document (10/2010) Updated the work around in silicon issue 17 (ADC). Added silicon issue 18 (All). © 2010 Microchip Technology Inc C), (PSV DS80465D-page 9 ...

Page 10

... NOTES: DS80465D-page 10 © 2010 Microchip Technology Inc. ...

Page 11

... PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 12

... Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 Taiwan - Kaohsiung Tel: 886-7-213-7830 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2010 Microchip Technology Inc. 08/04/10 ...

Related keywords