PIC24HJ256GP206-I/PT Microchip Technology, PIC24HJ256GP206-I/PT Datasheet - Page 283

• Manufacturer Part Number: PIC24HJ256GP206-I/PT
• Description: IC PIC MCU FLASH 256X16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ256GP206-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 256KB (85.5K x 24)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 18x10b, 18x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: 3-Wire/I2C/USART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 13
• Operating Supply Voltage: 0 V to 2.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM300019, DV164033, MA240012, DM300024
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 18-ch x 12-bit
• Controller Family/series: PIC24
• No. Of I/o's: 53
• Ram Memory Size: 16KB
• Cpu Speed: 40MIPS
• No. Of Timers: 13
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM300019 - BOARD DEMO DSPICDEM 80L STARTERDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TABLE A-2:
© 2009 Microchip Technology Inc.
Section 19.0 “Enhanced CAN
(ECAN™) Module”
Section 20.0 “10-Bit/12-Bit Analog-to-
Digital Converter (ADC)”
Section 21.0 “Special Features”
Section 24.0 “Electrical
Characteristics”
Section Name
MAJOR SECTION UPDATES (CONTINUED)
Changed bit 11 in the ECAN Control Register 1 (CiCTRL1) to Reserved
(see Register 19-1).
Added the ECAN Filter 15-8 Mask Selection (CiFMSKSEL2) register (see
Register 19-19).
Replaced the ADC Module Block Diagram (see Figure 20-1) and removed
Figure 21-2.
Added Note 2 to the Device Configuration Register Map (see Table 21-1)
Updated Typical values for Thermal Packaging Characteristics (see
Table 24-3).
Updated Min and Max values for parameter DC12 (RAM Data Retention
Voltage) and added Note 4 (see Table 24-4).
Updated Power-Down Current Max values for parameters DC60b and
DC60c (see Table 24-7).
Updated Characteristics for I/O Pin Input Specifications (see Table 24-9).
Updated Program Memory values for parameters 136, 137 and 138
(renamed to 136a, 137a and 138a), added parameters 136b, 137b and
138b, and added Note 2 (see Table 24-12).
Added parameter OS42 (G
(see Table 24-16).
Updated Watchdog Timer Time-out Period parameter SY20 (see
Table 24-21).
PIC24HJXXXGPX06/X08/X10
Update Description
M
) to the External Clock Timing Requirements
DS70175H-page 281