PIC16C76-04I/SP Microchip Technology, PIC16C76-04I/SP Datasheet - Page 2

• Manufacturer Part Number: PIC16C76-04I/SP
• Description: IC MCU OTP 8KX14 A/D PWM 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C76-04I/SP

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: OTP
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Data Converters: A/D 5x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

PIC16C76
3. Module: SSP Module (I
4. Module: Timer0
DS80090A-page 2
If the bus is active when the I
and the next 8 bits of data on the bus match the
address of the device, then the SSP module will
generate an Acknowledge pulse.
Work around
Before enabling the I
is not active.
The TMR0 register may increment when the WDT
postscaler is switched to the Timer0 prescaler. If
TMR0 = FFh, this will cause TMR0 to overflow
(setting T0IF).
Work around
Follow the following sequence:
a) Read the 8-bit TMR0 register into the
b) Clear the TMR0 register
c) Assign WDT postscaler to Timer0
d) Write W register to TMR0
W register
2
C mode, ensure that the bus
2
C™ mode)
2
C mode is enabled,
 2001 Microchip Technology Inc.