PIC16C74A-20/P Microchip Technology, PIC16C74A-20/P Datasheet - Page 3

• Manufacturer Part Number: PIC16C74A-20/P
• Description: IC MCU OTP 4KX14 A/D PWM 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C74A-20/P

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 33
• Program Memory Type: OTP
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 33
• Ram Memory Size: 192Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Package: 40PDIP
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 33
• Interface Type: I2C/SPI/USART
• On-chip Adc: 8-chx8-bit
• Number Of Timers: 3
• Core: PIC
• Processor Series: PIC16C
• Maximum Clock Frequency: 20 MHz
• Data Ram Size: 192 B
• Data Rom Size: 192 B
• Mounting Style: Through Hole
• A/d Bit Size: 8 bit
• A/d Channels Available: 8
• Height: 3.81 mm
• Length: 52.26 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Supply Voltage (max): 6 V
• Supply Voltage (min): 4 V
• Width: 13.84 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 444-1001 - DEMO BOARD FOR PICMICRO MCU
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

3. Module: SSP (I
© 2007 Microchip Technology Inc.
MOVF
IORLW
ANDLW
MOVWF
Note:
TRISC, W
0x18
B’11111001’
TRISC
This correction applies to the Data Sheets
for the following devices:
• PIC14000 (DS40122B)
• PIC16C6X (DS30234D) except
• PIC16C62B/72A (DS35008B)
• PIC16C63A/65B/73B/74B (DS30605C)
• PIC16C72/73/73A/74/74A/76/77
• PIC16C923/924 (DS30444E)
• PIC16C925/926 (DS39544A)
• PIC16F72 (DS39597B)
• PIC16F73/74/76/77 (DS30325B)
PIC16C61 (does not implement SSP
module)
(DS30390E)
2
C Mode)
; Example for a 40-pin part such as the PIC16F73
; Ensures <4:3> bits are ‘11’
; Sets <2:1> as output, but will not alter other bits
; User can use their own logic here, such as IORLW, XORLW and ANDLW
The description of the I
bits is clarified. To ensure proper communication
of the I
SCL]) corresponding to the I
‘1’. If any TRIS bits (TRISx<7:0>) of the port con-
taining the I
changed in software during I
using a Read-Modify-Write instruction (BSF, BCF),
then the I
and I
change any of the TRISx bits (TRIS bits of the port
containing the I
or BCF during I
necessary to change the TRISx bits during
communication, the following method can be
used:
2
2
C communication may suspend. Do not
C Slave mode, the TRIS bits (TRISx [SDA,
2
C mode may stop functioning properly
2
SSP MODULE
C pins (PORTx [SDA, SCL]) are
2
2
C communication. If it is absolutely
C pins) using the instruction BSF
2
C pins related to the TRIS
2
C pins must be set to
2
C communication
DS80132F-page 3