C8051F040-GQ Silicon Laboratories Inc, C8051F040-GQ Datasheet - Page 31

• Manufacturer Part Number: C8051F040-GQ
• Description: IC 8051 MCU 64K FLASH 100TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F04xr

Specifications of C8051F040-GQ

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 64
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x8b, 13x12b; D/A 2x10b, 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F0x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 4.25 KB
• Interface Type: CAN/SMBus/SPI/UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 64
• Number Of Timers: 5
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F040DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 8-bit or 13-ch x 12-bit
• On-chip Dac: 2-ch x 12-bit
• No. Of I/o's: 64
• Ram Memory Size: 4352Byte
• Cpu Speed: 25MHz
• No. Of Timers: 5
• Rohs Compliant: Yes
• Data Rom Size: 64 KB
• A/d Bit Size: 12 bit
• A/d Channels Available: 13
• Height: 1 mm
• Length: 14 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Width: 14 mm
• Package: 100TQFP
• Device Core: 8051
• Family Name: C8051F04x
• Maximum Speed: 25 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1205 - DEV KIT FOR F040/F041/F042/F043
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1204

1.6.
The C8051F04x family of devices feature a Controller Area Network (CAN) controller that implements
serial communication using the CAN protocol. The CAN controller facilitates communication on a CAN net-
work in accordance with the Bosch specification 2.0A (basic CAN) and 2.0B (full CAN). The CAN controller
consists of a CAN Core, Message RAM (separate from the C8051 RAM), a message handler state
machine, and control registers.
The CAN controller can operate at bit rates up to 1 Mbit/second. Silicon Labs CAN has 32 message
objects each having its own identifier mask used for acceptance filtering of received messages. Incoming
data, message objects and identifier masks are stored in the CAN message RAM. All protocol functions for
transmission of data and acceptance filtering is performed by the CAN controller and not by the C8051
MCU. In this way, minimal CPU bandwidth is used for CAN communication. The C8051 configures the
CAN controller, accesses received data, and passes data for transmission via Special Function Registers
(SFR) in the C8051.
1.7.
The C8051F04x MCU Family includes two Enhanced Full-Duplex UARTs, an enhanced SPI Bus, and
SMBus/I
CIP-51's interrupts, thus requiring very little intervention by the CPU. The serial buses do not "share"
resources such as timers, interrupts, or Port I/O, so any or all of the serial buses may be used together with
any other.
Controller Area Network
Serial Ports
2
C. Each of the serial buses is fully implemented in hardware and makes extensive use of the
CANTX
TX
(32 Message Objects)
Figure 1.11. CAN Controller Diagram
Message RAM
Core
CAN
Message Handler
CANRX
RX
Rev. 1.5
CAN Controller
C8051F040/1/2/3/4/5/6/7
REGISTERS
Prescaler
BRP
Interrupt
CAN_CLK
(f
sys
)
C8051F04x
CIP-51
C
S
Y
S
L
K
S
R
's
F
MCU
31