DSPIC33FJ64GS610-I/PF Microchip Technology, DSPIC33FJ64GS610-I/PF Datasheet - Page 405

• Manufacturer Part Number: DSPIC33FJ64GS610-I/PF
• Description: IC MCU/DSP 64KB FLASH 100TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64GS610-I/PF

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 100-TQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, QEI, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 9K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 24x10b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Numeric And Arithmetic Format: Fixed-Point or Floating-Point
• Instruction Set Architecture: Harvard
• Device Million Instructions Per Second: 40 MIPs
• Maximum Clock Frequency: 120 MHz
• Number Of Programmable I/os: 85
• Data Ram Size: 4 KB
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 24 Channel
• On-chip Dac: 10 bit, 4 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TABLE B-1:
 2010 Microchip Technology Inc.
Section 9.0 “Oscillator Configuration” Removed Section 9.2 “FRC Tuning”.
Section 10.0 “Power-Saving Features” Updated the last paragraph of Section 10.2.2 “Idle Mode” to clarify when
Section 11.0 “I/O Ports”
Section 16.0 “High-Speed PWM”
Section 20.0 “Universal
Asynchronous Receiver Transmitter
(UART)”
Section 22.0 “High-Speed 10-bit
Analog-to-Digital Converter (ADC)”
Section 24.0 “Special Features”
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
Section Name
MAJOR SECTION UPDATES (CONTINUED)
Removed the PRCDEN, TSEQEN, and LPOSCEN bits from the Oscillator
Control Register (see Register 9-1).
Updated the Oscillator Tuning Register (see Register 9-4).
Removed the Oscillator Tuning Register 2 and the Linear Feedback Shift
Register.
Updated the default reset values from R/W-0 to R/W-1 for the SELACLK
and APSTSCLR<2:0> bits in the ACLKCON register (see Register 9-5).
Renamed the ROSIDL bit to ROSSLP in the REFOCON register (see
Register 9-6).
instruction execution begins.
Added Note 1 to the PMD1 register (see Register 10-1).
Changed the reference to digital-only pins to 5V tolerant pins in the
second paragraph of Section 11.2 “Open-Drain Configuration”.
Updated the High-Speed PWM Module Register Interconnect Diagram
(see Figure 16-2).
Updated the SYNCSRC<2:0> = 111, 101, and 100 definitions to
Reserved in the PTCON and STCON registers (see Register 16-1 and
Register 16-5).
Updated the PWM time base maximum value from 0xFFFB to 0xFFF8 in
the PTPER register (Register 16-3).
Updated the smallest pulse width value from 0x0008 to 0x0009 in Note 1
of the shaded note that follows the MDC register (see Register 16-10).
Updated the smallest pulse width value from 0x0008 to 0x0009 in Note 2
of the shaded note that follows the PDCx and SDCx registers (see
Register 16-12 and Register 16-13).
Added Note 2 and updated the FLTDAT<1:0> and CLDAT<1:0> bits,
changing the word ‘data’ to ‘state’ in the IOCONx register (see
Register 16-19).
Updated the two baud rate range features to: 10 Mbps to 38 bps at 40
MIPS.
Updated the TRGSRCx<4:0> = 01101 definition from Reserved to PWM
secondary special event trigger selected, and updated Note 1 in the
ADCP0-ADCP6 registers (see Register 22-6 through Register 22-12).
Updated the second paragraph and removed the fourth paragraph in
Section 24.1 “Configuration Bits”.
Updated the Device Configuration Register Map (see Table 24-1).
Preliminary
Update Description
DS70591C-page 405