C8051T601-GS Silicon Laboratories Inc, C8051T601-GS Datasheet - Page 175

• Manufacturer Part Number: C8051T601-GS
• Description: IC 8051 MCU 8K-EEPROM 14-SOIC
• Manufacturer: Silicon Laboratories Inc
• Series: C8051T60xr

Specifications of C8051T601-GS

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 8
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: OTP
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 14-SOIC (3.9mm Width), 14-SOL
• Processor Series: C8051T6x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SMBus, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 8
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051T600DK
• Minimum Operating Temperature: - 40 C
• For Use With: 336-1404 - KIT DEV FOR C8051T60X MCU'S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 336-1653-5

SFR Definition 26.3. PCA0CPMn: PCA Capture/Compare Mode
SFR Addresses: PCA0CPM0 = 0xDA
Note: When the WDTE bit is set to 1, the PCA0CPM2 register cannot be modified, and module 2 acts as the
Name
Reset
Bit
Type
7
6
5
4
3
2
1
0
Bit
PWM16n 16-bit Pulse Width Modulation Enable.
Watchdog Timer. To change the contents of the PCA0CPM2 register or the function of module 2, the
Watchdog Timer must be disabled.
ECOMn
CAPPn
CAPNn
ECCFn
PWMn
Name
TOGn
MATn
PWM16n
R/W
7
0
This bit enables 16-bit mode when Pulse Width Modulation mode is enabled.
0: 8-bit PWM selected.
1: 16-bit PWM selected.
Comparator Function Enable.
This bit enables the comparator function for PCA module n when set to 1.
Capture Positive Function Enable.
This bit enables the positive edge capture for PCA module n when set to 1.
Capture Negative Function Enable.
This bit enables the negative edge capture for PCA module n when set to 1.
Match Function Enable.
This bit enables the match function for PCA module n when set to 1. When enabled,
matches of the PCA counter with a module's Capture/Compare register cause the
CCFn bit in PCA0MD register to be set to logic 1.
Toggle Function Enable.
This bit enables the toggle function for PCA module n when set to 1. When enabled,
matches of the PCA counter with a module's Capture/Compare register cause the logic
level on the CEXn pin to toggle. If the PWMn bit is also set to logic 1, the module oper-
ates in Frequency Output Mode.
Pulse Width Modulation Mode Enable.
This bit enables the PWM function for PCA module n when set to 1. When enabled, a
pulse width modulated signal is output on the CEXn pin. The 8-bit PWM is used if
PWM16n is cleared; 16-bit mode is used if PWM16n is set to logic 1. If the TOGn bit is
also set, the module operates in Frequency Output Mode.
Capture/Compare Flag Interrupt Enable.
This bit sets the masking of the Capture/Compare Flag (CCFn) interrupt.
0: Disable CCFn interrupts.
1: Enable a Capture/Compare Flag interrupt request when CCFn is set.
ECOMn
R/W
6
0
CAPPn
R/W
,
5
0
PCA0CPM1 = 0xDB
CAPNn
R/W
Rev. 1.2
4
0
Function
,
C8051T600/1/2/3/4/5/6
PCA0CPM2 = 0xDC
MATn
R/W
3
0
TOGn
R/W
2
0
PWMn
R/W
1
0
ECCFn
R/W
0
0
175